Specifications:
The FRIALEN KHP Ball Valves are made from HD-PE with NBR-sealing and are designed for 1/4-turn operation. They are suitable for use in gas supply and compressed air systems, with a maximum working pressure of 10 bar. The valves are available in various sizes, with dimensions and weights specified for each size.

Procedures:
Installation involves connecting the ball valve to pipes using couplers, elbows, or T-pieces fused to its ends. The connection is made through FRIALEN-fusing, ensuring a leakproof and strong longitudinal bond. Proper preparation of spigot ends, including oxide layer removal and cleaning, is necessary before fusion.

Standards and Recommendations:
The valves are compatible with pipes of SDR-stages 11 to 17.6, with a minimum wall thickness of 3 mm. They are registered under DVGW-Registration Nos.: DG-8631AU2251, DG-8631AU2252, and DG-8631AU2253. The installation kit BS allows operation from the street cap and is optimized for the FRIALEN-Ball Valve KHP.

Key Features:
- Fully fused HD-PE pipe network without transitions to other materials.
- Floating ball and axial seals compensate for bending defects.
- Resistant to chemical and electrical reactions, with no corrosion proofing required.
- Low pressure loss and optimum flow speed.
- Extra long spigot ends for two fusion operations.
- Traceability coding with additional barcode.

Contact Information:
For further information, contact customer service at +49 (0) 621 48 61 43 1 or visit www.frialen.com.