FRIDURIT® fume scrubbers Reliable exhaust air cleaning at laboratory fume cupboards

For the Enviroment and your Safety The clean solution Laboratory operators have great responsibility: Health protection and staff safety aspects as well as the preservation of material values are of vital importance. Extreme care must be taken when working with contaminated laboratory emissions such as those produced in fume cupboards and where hazardous substances are used. In addition, national environmental protection legislation as well as general legislation requires that laboratory emissions are cleaned with a maximum degree of absorption of aggressive and toxic gases. FRIDURIT fume scrubbers...

FRIDURIT fume scrubbers are available in four versions. Built-in versions can be easily integrated in laboratory fume cupboards. In case of low ceilings or when connecting up to two fume cupboards there are versions available that can be installed as free-standing units either beside the fume cupboard or in an adjoining room. Our membership in EGNATON – European Association for Sustainable Laboratory Technologies – highlights our central maxim: Sustainability and Viability. FRIDURIT | fume scrubbers

The functional Principle Technology tried and tested FRIDURIT fume scrubbers work according to a highly efficient absorption principle that has been developed and optimized during numerous practical tests. Intelligent air ducts make low air resistance inside the system possible. This means that the size of ventilation components – and as a result the energy costs for the entire system - can be kept to a minimum. FRIDURIT | fume scrubbers

Synthetic fabrics specially developed and manufactured for the application ensure minimum moisture content in the waste air and thus provide the highest possible degree of efficiency. The patented atomised spraysystem leads to maximum absorption efficiency at low differential pressures. purified waste-air 1 The contaminated exhaust air is suctioned directly into the Intensive scrubbing of the pollutants in the scrubbing liquid spray there takes place. 3 Absorption is optimized and the residual liquid is separated by means of agglomerators and droplet separators. 4 The purified waste-air is led...

Economical. Efficient. Sustainable. In a nutshell Sustained development and viability are the maxims for using FRIDURIT fume scrubbers. All over the world, hundreds of companies and institutions work with over 1,500 installed units. At the end of the day it’s trust that counts! FRIDURIT fume scrubbers are hallmarked by the following: QQ Highest degree of absorption efficiency of up to 95% despite compact design. Extremely simple to operate and largely languageindependent due to intuitive operation. Approx. 30% less air resistance than when using comparable equipment. Spray function remains in...

Accessories especially geared to the FRIDURIT fume scrubbers, e.g. fans, ventilation components and special control devices complete the range of products. In order to reduce interfaces, control, operation and measurement technology are combined to a single unit. This allows you to fully concentrate on your actual tasks. If no central unit is available for the chemically contaminated wastewater from the fume scrubber, the FRIDURIT neutralisation unit will take on this task. Materials that come in contact with media are largely resistant to chemicals, separable according to type and are recyclable....

FRIATEC Aktiengesellschaft Ceramics Division Steinzeugstraße 50 68229 Mannheim, Germany Phone: +49 621 486-1879 Fax: +49 621 486-1605 [email protected] www.friatec.de Worldwide at your doorstep