FRIDURIT direct
12Pages

FRIDURIT® direct Technical description | April 2008 The quick ceramic solution

Legal notice The specifications of our products are based on extensive technical development and on the results of stringent tests. We have gained experience in diverse areas of application over many years with FRIDURIT Technical Ceramics. However, the user is responsible for checking our specifications and recommendations as to his own application and, if necessary, confirming the suitability by conducting his own tests. We reserve the right to make technical alterations. FRIATEC Aktiengesellschaft Bereich FRIDURIT Labortechnik P.O. Box 710261 68222 Mannheim Germany phone: +49 621 486-1879...

Technical description | Index Characteristics of Technical Ceramics Wall and island benches Fume cupboard surfaces ■ Minimum distances for sink apertures Laboratory sinks made from Technical Ceramics 1 0

FRIDURIT® direct Preface This technical description gives you extensive information about FRIDURIT direct as a basis for your specifications. Should you have any questions which this document does not answer, we would be pleased to advise you further. For contact details, please refer to the end of this brochure or to the internet on www.fridurit.de. FRIDURIT®direct The quick ceramic solution FRIDURIT direct is a quickly available component-system of high-quality ceramic laboratory benchtops and matching sinks and cup sinks. Adapt our basic benchtop types I and II to meet your requirements...

FRIDURIT® direct The material FRIDURIT Technical Ceramics is produced using a time-consuming process from natural raw materials. The high-quality, silica-based material is impressive in its wideranging chemical and thermal resistance, extraordinary durability, scratch and impact strength. Even after years of intensive use, products made from Technical Ceramics maintain their flawless appearance. The wear-free surfaces of the benchtops and sinks remain easy to clean and to decontaminate and thus always provide safety and aesthetics in the laboratory. Further information, e.g. test...

Basic types for wall and island benches Benchtops up to 1200 mm in length can be provided for your wall and island benches according to the The following variations can be arranged with the O or without symbol = glazed Technical description | April 2008

FRIDURIT® direct Basic tops for fume cupboards Basic types III to V The basic types III, IV and V with circumferential marine edge can be adjusted to your individual fume cupboard dimensions. The work surface area of the different types of fume cupboard benchtops remains unchanged with the modification of the external dimensions. In order to prevent an uncontrolled discharge of fluids into the drainage system, cup sinks can be mounted into the fume cupboard benchtops from above to provide a 7 mm bunding around the cup sink. Further details on the installation of sinks can be found in the...

FRIDURIT® direct Technical details Edge profiles FRIDURIT direct full-size laboratory benchtops made from Technical Ceramics are available with three different edge profiles. Glazed with integrated ceramic edge The edges are integrated into the benchtop, i.e. they are formed into the benchtop during the production process directly with no joints. The edge prevents fluids from overflowing and offers staff protection in the laboratory. Cut (unglazed) with integrated ceramic edge Cut (unglazed) without edge Minimum distances for sink apertures Apertures can be placed anywhere in the benchtop....

Arrangement examples Arrangement examples The adjacent figure shows some possibilities of how to arrange basic benchtop types I and II in your laboratory. With the circumferential edge, a closed table arrangement adjacent to the wall can be achieved. This solution is Wall bench with circumferential edge If other widths are requested, the rear edge can be removed in production. A wall bench with a maximum Island benches can have a maximum width of 1520 mm. There are no limits to the length of the table arrangement. The flush-mounted or sit on sinks can be installed lengthwise or crosswise....

FRIDURIT® direct Laboratory sinks made from Technical Ceramics | Accessories The sinks are made from FRIDURIT Technical Ceramics according to DIN 12915. All visible surfaces have a light grey glaze. Sinks Internal dimensions (in mm) l b t 400 500 600 Order code with 1½” PE-outlet and standpipe Cup sinks Internal dimensions (in mm) l b t ø105 250 Order code P-trap Polyethylene P-trap (stench trap), horizontal / vertical, provides simple, reliable connections between drainage system and PE-outlet 1½” thread connection. Easy adaption and cleaning due to screw connection. outlet: compression...

FRIDURIT® direct Notes on installation for benchtops FRIDURIT direct benchtops are ready to install when delivered. Due to their high stability, FRIDURT laboratory benchtops are self-supporting, i.e. they only need to be supported near each corner (see diagram). The breaking load (P) of the benchtop depends on its width (B) and length (L): P (in kg) = 1600 x B/L (in mm) Support (by levelling devices) We recommend mounting the benchtops on levelling devices since this allows them to be levelled and aligned simply and quickly. There are two methods of sealing joints between FRIDURIT full-size...

FRIDURIT® system solutions Safety and competence for successful laboratory projects FRIDURIT® laboratory benchtops and sinks ■■ made from Technical Ceramics Highest resistance to virtually all chemicals commonly used in the laboratory. Low-maintenance and reliable due to scratch and abrasion proof surface. Non combustible and 100 % recyclable. ■■ made from Polypropylene Resistant to breakage, welded with no joints and easy to clean. FRIDURIT® Fume scrubber Absorbs inorganic contaminants in the waste air from the laboratory safely and reliably. A mature solution to the problem. FRIDURIT®...