frialen Safety Fittings The safe jointing technology for gas-, water- and industrial pipings made of HD-PE and PE-Xa Product Range ES 34/14 valid from 1st June 2014

Things worth knowing about FRIALEN®-Safety Fittings and this Product Range DVGW Certification/Fusability Contents To help you to find specific products easily we have included an alphabetical list arranged in product groups on pages 4-6. Stocking Status Please note the following: • All articles with a stock Status of 1 are usually available ex-stock. • All articles with a stock Status of 2 are manufactured to order and hence have a delivery time of 3 - 4 weeks. Packaging and pallet units The product range shows packaging units (BX) and pallet units (PU). An order in complete BX/PU will simplify...

Things worth knowing about FRIALEN®-Safety Fittings and this Product Range FRIALEN saddle parts Top-Loading Pressure loading capacity The pressure loading capacity of FRIALEN/FRIAFIT-Safety Fittings made of PE 100 dependent on the SDR (Standard Dimension Ratio) marking. Pipe outside diameter d SDR = Pipe wall thickness s The contributory factors for this are the latest revised standards DIN EN 1555, DIN EN 12201, DIN 8074 and DIN 8075, taking the design factor C into account (calculation coefficient for components made of PE). This gives the following pressure stages: Fitting material: PE 100...

FRIALOC PE shut-off valve with shut-off mechanism suitable for plastics FRIALOC Water 43 Application: Water Installation kits for FRIALOC PE shut-off valves FBS 43 Pressure Tapping Tees with extra long outlet spigot in kit version DAA (KIT) 35 Pressure Tapping Tees with extra long outlet spigot DAA 36 Pressure Tapping Tees with parallel dome and extra long outlet spigot DAP 37 Pressure Tapping Tee Top-Loading with extra long outlet spigot DAA-TL 37 Pressure Tapping Tees Top-Loading/Relining with extra long outlet spigot DAA-TL/RE 38 Cap for Pressure Tapping Tees K 38 Pressure Tapping Valves with...

Y-Pieces with 3 integrated electrofusion couplers Y 22 YS-Pieces with 2 integrated electrofusion couplers and a spigot end YS 22 Shut off Saddles Top-Loading SPA-TL 40 Cap for Shut off Saddles SPAK 40 Spigot Saddles Top-Loading SA-TL 33 Spigot Saddles XL SA-XL 33 Spigot Saddles with integral drill SAB 34 Spigot Saddles with flange outlet SAFL 34 T-Pieces with extra long outlet spigot in kit Version TA (KIT) 20 T-Pieces with HD-PE/GGG adapter for connection of BAIO spigot hydrant TGB 19 Transition Fittings Transition Fittings HD-PE/Steel USTR 23 Transition Fittings HD-PE/Steel (Spigot fittings)...

Valve Tapping Saddles with HD-PE/Gunmetal adapter, female thread VAM-RG 39 Valve Tapping Saddle Top-Loading with HD-PE/Gunmetal adapter, female thread VAM-RG-TL 39 Repair and Reinforcing Saddles VVS 30 Repair Saddles XL RS-XL 31 Repair Saddle Top-Loading VSC-TL 31 Swan Neck Bend WET 18 90° Elbow with base unit WF 90° 18 90° Elbow with base unit and HD-PE/GGG WFGB 18 adapter for connection of BAIO spigot hydrant

Slide-over couplers, SDR 11 With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With one indicator per fusion zone for visual fusion control. Diameter d 400 and bigger with pre-heating technology (d 400 – d 450 optional use; d 500 – d 900 required). Special sizes, pressure stages and designs on request PE 100 SDR 11 Maximum working pressure 16 bar (water)/10 bar (gas) . j separate fusion zones

Couplers with removable stop Can also be used as repair couplers. With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With one indicator per fusion zone for visual fusion control. With exposed heating coils for optimal heat transfer, large insertion depth, extra wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material for use without holding devices. With fusion indicator for visual fusion...

Slide-over couplers, SDR 17 With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With separate fusion zone and one indicator per fusion zone for visual fusion control. The UB d 1000 and above can only be fused with the FRIAMAT XL. Diameter d 560 - d 900 with pre-heating technology which is required for installation. Special sizes, pressure stages and designs on request PE 100 SDR 17 Maximum working pressure 10 bar (water)/5 bar (gas) ....

Slide-over couplers, SDR 9 With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With separate fusion zone and one indicator per fusion zone for visual fusion control. With pre-heating technology (d 400 – d 450 optional use; d 500 – d 630 required). Special sizes, pressure stages and designs on request PE 100 SDR 9 Maximum working pressure 20 bar (water), 10 bar (gas) Stockstatus 1 1 1 2 2 Long Couplers with removable center stop The coupler...

Conical ring couplers Easy and quick assembly, also as slide over coupler and given limited space. Variable diameter range to bridge large tolerance conditions of the outer pipe diameter and out-of-roundness. With flexible fusion conical ring for easy assembly given pronounced pipe out-of-roundness. The installation is made without fixing device and rounding clamp. Mechanical minimisation of the joint gap thanks to flex ring system. Integrated tensioning device for assembly and gap minimisation. Exposed, fixed heating coil, for optimal heat transfer during fusion, broad fusion zones as well as...