The FRIAFIT Sewage system for gravity pipe
16Pages

Always the right decision: Sewage System Jointing Technology for a long useful life

REHABILITATION SCENARIO: □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ Sewage drain About 20% of the public waste and mixed water drainage network needs to be rehabilitated*. The main reason for this is the use of pipe materials which are not consistently able to meet such im- pacts as e.g. ground movement, peak loads or in-growing roots. Large amounts of contaminated sewage may therefore reach the soil in an untreated state, and inversely ground water may enter the waste water pipe systems. Consequences of such a develop- ment are a serious...

nage A material which convinces completely: HDPE HDPE has been tried and tested for more than 40 years in both gas and water supply. It convinces through a number of advantages which allow a safer and more efficient operation of sewage drainage systems – now and in future: • useful life of over 100 years forecast according • excellent resistance to aggressive media • high abrasion resistance to debris movement and high pressure rinsing • low surface roughness prevents deposits • elasticity of the pipe system allows absorpthe tion of peak loads and ground movement • material rupture is...

LONG LIFESPAN, SAFE, ECONOMICAL: □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ FRIAFIT® Joint By choosing FRIAFIT you are creating the perfect conditions for an efficient installation and economic operation of your drainage. The superior advantages of FRIAFIT fittings make sure of that: Exposed heating coil FRIAFIT boasts exposed heating coils without a HDPE layer getting in the way. These provide: • optimum heat transfer during fusion • a good build-up of molten pressure • a homogenous connection of the materials - pipe and fitting become an...

ing Technology Areas of application The FRIAFIT sewage system may be fused without any limitations with pipes made from HDPE according to DIN 8074/8075, EN 12666 of grades SDR 33, SDR 26, SDR 17.6 and SDR 17. Pipes made of PE 63, PE 80 and PE 100 with a melt flow rate MFR190/5 between 0.2 - 1.7 g/10 min. can be fused. Processing is possible with ambient temperatures between -10 °C to +45 °C. Preparation HDPE pipes react in contact with ambient air creating an oxide layer. This oxide layer must be removed from the surface to be covered as part of the preparation for the The fusion process...

FRIAFIT® Inspecl □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ FRIAFIT inspection chamber connections consist of two components: the sewage inspection chamber adapter and the sewage insert sleeve. Adjusted perfectly to the different properties of concrete and HDPE, they provide optimum connection up to d 630 for a flexible joint to the inspection chamber according to the standards DIN FRIAFIT ASF sewage inspection chamber adapter The FRIAFIT sewage inspection chamber adapter has usually been anchored tightly in the inspection chamber by the...

tion chamber connection PERFECT: The FRIAFIT inspection chamber adapter and the insert sleeve are the perfect double to join HDPE pipes with inspection chambers up to d 630. Flexible and reliably leak-proof.

PERFECT FUSION IN ALL SIZES FRIAFIT -Coin □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ FRIAFIT couplers provide a lasting connection for pipe systems made from HDPE which is tight and longitudi- nally strong. Due to the superior electrofusion technology pipe and coupler become an inseparable unit giving even in-growing roots no chance at all. • designed as slide-over coupler without centre stop for equally bottom levelled pipe connections without • external reinforcement on large couplers for stability and optimum molten pressure during fusion •...

plers And what you are used to in small sizes: Now also Products typically not yet offer any successful pro- available in large sizes. blem solution. With the dimensions up to d 630, the FRIAFIT product The offer includes a comprehensive service, e.g.: trai- range now offers you sizes which no other manufacturer ning, presentations, construction site service and trai- has ever introduced to the market in such a comprehen- ning, advise and trial installations. It is only by this that sive way – anywhere in the world. the project can be completed with high quality. We offer this service to...

SIMPLE HANDLING, PERFECT JOINTS: □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ FRIAFIT sewa VERY GOOD The FRIAFIT top loading sewage saddle (ASA-TL) The FRIAFIT sewage saddle serves for the connection of sewage service pipes to HDPE waste water drains in new installations, rehabilitation or subsequent integration. The sewage saddle is a compact construction part made from HDPE, consisting of a weld-on saddle with an inte- grated fusion coupler in the outlet. The saddle is fixed to the pipe by means of the FWFIT clamping and tapping unit from the...

ge saddles The FRIAFIT transition saddle (ASA-TL/KG) The transition saddle ASA-TL/KG with integrated slip-on coupler at the outlet facilitates a direct connection for HDPE sewers to house service connections or storm drains made of PVC/PP DN 150. Easy installation thanks to the proven FWFIT clamping and tapping tool from the FRIATOOLS product range. • integrated slip-on coupler at the outlet d 160 (DN 150) • direct transition to the connecting pipes PVC/PP without interfering displacement or drain obstruction • fusion required at outlet no • little space required in the pipe trench IN USE:...

SIMPLE HANDLING, PERFECT JOINTS: □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ □□□□□ FRIAFIT bends (ABM / ABMS) The FRIAFIT® bends d 160/DN 150 are used for change of direction in domestic and combined sewage drainage. The types ABM (coupler/coupler) or ABMS (coupler/pipe spigot) and the angle spacings 15°, 30° and 45° facilitate a comfortable piping configuration. Angles of 60°, 90° etc. can e.g. also be produced by using multiple elbows. • little space required thanks to compact design • reduction of the installation time thanks to integrated fusion...