FRIAFIT Product Range
16Pages

PRODUCT RANGE AF 17/13 valid from 1st February 2013 ® FRIAFIT Sewage System The safe connection method for HD-PE pipes carrying sewage and waste water

Things worth knowing about FRIAFIT®-Sewage System and this Product Range Contents Norm Conformity/Fusion capability To help you to find specific products easily we have included an alphabetical list arranged in product groups on page 3. Stocking Status Please note the following: • All articles with a stock Status of 1 are usually available ex-stock. • All articles with a stock Status of 2 are manufactured to order and hence have a delivery time of 3 - 4 weeks. • All articles with stock Status 3 are only manufactured for special customers and could not be returned to us and have a delivery...

Things worth knowing about FRIAFIT6-Sewage System and this Product Range The static calculation for the PE sewer pipe must in each indi- vidual case be carried out by the relevant pipe manufacturer or engineering Office depending on the ambient conditions which The annular rigidity of the pipe joint fused with FRIAFIT®- Couplers will in all cases be higher than the annular rigidity of Cooling times FRIAFIT®-Couplers, -sewage insert sleeves, -sewage bends and transition fittings The cooling times given in the barcodes and identified by additional letters (C.T.) are the times during which the...

Coupler SDR 17 For the connection of HD-PE pipelines carrying water-, sewage- and foul water. With exposed heating coils for optimal heat transfer, large insertion depth, extra wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material for use without holding devices. Diameter d 560 and bigger with pre-heating technology. j separate fusion zones For couplers PE 100 SDR 17 d 710 - d 1200 please refer to our FRIALEN product range. Sewage insert sleeve For a flexible connection of HD-PE pipes into concrete inspection chambers according to DIN V 4034...

Sewage inspection chamber adapter Connection unit between the ready made concrete inspection chamber and the FRIAFIT sewage insert sleeve AEM. With anchoring ribs across the whole width of the diameter for a secure seat in the concrete. Resilient centre section serves to take up the stresses when the pipes are under load. Stable inside diameter due to high wall thickness giving a good connection to the sewage insert sleeve AEM in accordance with DIN V 4034. Sewage inspection chamber adapter for masoned canals L = 250 mm Connection unit between masoned canal and FRIAFIT AEM sewage insert...

Sewage saddle Top-Loading d2 The FRIAFIT sewage saddle ASA-TL is a compact component consisting of a fusion saddle with an integral fusion coupler at its outlet (d 160). The FRIAFIT sewage saddle can be used to connect sewer pipes to an existing main sewer system made of HD-PE. With exposed heating element for optimal heat transfer. Tapping area free of heating wires. The FRIAFIT sewage saddle will be fixed on the pipe by a clamping and drilling unit FWFIT and tapping takes place after the cooling time. When processing d 200 with pipes SDR 11 - 33 and d 225 - d 315 with pipes SDR 26 - 33...

Sewage saddle Vacuum-Loading For the connection of large volume branches at HD-PE main pipes with less effort, minimal underground work and without interrupting the operation. HD-PE saddles with exposed heating element for optimal heat transfer. Outlet spigot d 225 for processing with FRIAFIT-Coupler AM or transition coupler AMKG d225 on PVC/PP DN 200. Innovative vacuum clamping unit for safe bridging of even large pipe out-of-roundnesses Assembly with FRIATOOLS-clamping unit VACUSET XL. Flush tapping with drilling equipment FWAB ASA. Application area SDR 11 on request Clamping unit...

Connecting spigot for connection of HD-PE connecting pipes to clay Sie sich bitte an unsere Hotline j Für die Montage d 560 und d 630 wenden and concrete pipes 0621/486-1896. For the connection of fused HD-PE house service lines or side branches to d clay or concrete pipes for new pipes as well as refurbishment - without sepaEW! s N rating or completely exposing the main sewer. The outlet spigot d 160 offers a levelled passage when processing with pipes SDR17/17.6. The bright inner surface facilitates an optimal view during camera inspection. Fusible with FRIAFIT-Coupler AM or FRIAFIT-bends...

Sewage bends (coupler/coupler) Little space required thanks to compact design as well as angle spacings of 15°, 30°, 45° facilitate a comfortable pipeline routing. Fusion couplers integrated on both ends to reduce the assembly time with exposed heating coils for an optimal heat transfer. The smooth, hydraulically optimised inter- nal contour offers a level passage when pipes SDR 17/17.6 are used. The bright surface facilitates an optimal view during camera inspection. Maximum working pressure 2.5 bar (sewage) Sewage bends (coupler/pipe spigot) Maximum working pressure 2.5 bar (sewage)...

Transition piece PE – PVC/PP Flexible material transition in domestic range between HD-PE pipes (SDR 33 - SDR 17) and PVC/PP pipes. HD-PE side can be fused with FRIAFIT AM sewage coupler, bends ABM/ABMS or with the outlet of the FRIAFIT ASA-TL sewage saddle. PVC/PP side acts as push-fit coupler with SBR lip seal gasket and large insertion depth. Transition piece PE - stoneware Flexible material transition in domestic range between HD-PE pipes (SDR 33- SDR 17) and stoneware pipes (spigot ends). HD-PE side can be fused with FRIAFIT AM sewage coupler, bends ABM/ABMS or with the outlet of the...

Sewage elbows 45° (spigot fittings) HD-PE fitting for use with FRIAFIT Coupler AM without holding devices. Sewage elbows 60° (spigot fittings) HD-PE fitting for use with FRIAFIT Coupler AM without holding devices. Sewage elbows 90° (spigot fittings) HD-PE fitting for use with FRIAFIT Coupler AM without holding devices.

Equal branch 45° (spigot fittings) HD-PE fitting for use with FRIAFIT Coupler AM without holding devices. Unequal branch 45° (spigot fittings) HD-PE fitting for use with FRIAFIT Coupler AM without holding devices. Unequal branch 60° (spigot fittings) HD-PE fitting for use with FRIAFIT Coupler AM without holding devices.