UPM209 ‹TA 1/5A, 80A direct›
5Pages

Network Analyzers Network Analyzers 4 DIN modules multifunction three-phase meter • • 4 DIN modules compact version Main electrical parameters measured and displayed for a cost-effective consumption analysis Version for 1 or 5A CT or for direct connection up to 80A MODBUS RTU/ASCII communication by RS485 port or MODBUS TCP communication by Ethernet port Possibility to manage the instrument in remote mode by WintoolNET software or by Web interface Fully bi-directional four quadrants measurements for all energies and powers Possibility to connect by PT Up to 8 MB for data recording (ENH version) Possibility to record all energy counters (ENH version) Up to 24 parameters selectable among real time measurements for MIN/AVG/MAX recording (ENH version) » General features UPM209 is an innovative instrument for measurement and recording of the electrical parameters. It is particularly suitable for consumption analysis and control, with an excellent quality/price ratio. UPM209 is the ideal instrument to establish the measurement points on the plant. The instrument can communicate through the RS485 serial port by MODBUS RTU/ASCII protocol or through Ethernet port by MODBUS TCP protocol. Furthermore, it is available the WintoolNET software for the instrument remote management. Web interface is also available in case of instrument with Ethernet port: a very useful function that gives the possibility to manage the instrument by any PC connected on the network. UPM209 provides fully and accurate information on the load in the measurement point and it allows to calculate the costs of the energy consumption. Data read by PC allows to generate consumption profiles, recorded values trend, alarms/events report and costs calculation as well as critical values identification. Available the remote firmware upgrade of the instrument. Energy audit. Monitoring system and energy control. Individual machine load monitoring. Power peak control. Switchboards, gensets, motor control centers, etc. Remote metering and cost allocation. » Related Products •

Network Analyzers » Available configurations BASIC ENH CURRENT INPUTS (make one choice only) AUXILIARY POWER SUPPLY COMMUNICATION PORT (make one choice only) RS485 for MODBUS RTU/ASCII communication Ethernet for HTTP, MODBUS TCP communication WintoolNET INSTRUMENT REMOTE MANAGEMENT Web server (only for instrument with Ethernet port) SIGN REPRESENTATION IN MODBUS PROTOCOL (make one choice only) DIGITAL OUTPUT (only for instrument with RS485 port) For alarm events or pulse emissions 2’s complement Fixed window DMD VALUE CALCULATION MODE Fixed or Sliding window 1 MB 8 MB Active and reactive...

Network Analyzers » Measurements & recordings INSTANTANEOUS VALUES POWER FACTOR (ind∩) CURRENT THD FREQUENCY PHASE ORDER DEMAND VALUES (DMD) DMD CURRENT (abs) DMD ACTIVE POWER (imp&exp) BALANCE OF DMD SYSTEM ACTIVE POWER (+/-) DMD REACTIVE POWER (imp&exp) BALANCE OF DMD SYSTEM REACTIVE POWER (+/-) DMD APPARENT POWER (imp&exp) BALANCE OF DMD SYSTEM APPARENT POWER (+/-) DMD POWER FACTOR (imp&exp) MAX ACTIVE POWER (imp&exp) MAX REACTIVE POWER (imp&exp) MAX APPARENT POWER (imp&exp) MAX POWER FACTOR (imp&exp) MAX TANGENT Ø (imp&exp) MAX VOLTAGE THD MAX DMD ACTIVE POWER (imp&exp) MAX DMD REACTIVE...

Network Analyzers » Specifications POWER SUPPLY Voltage range: Safety: Maximum consumption: 85 ... 265 VAC/110 VDC ±15% 300 V CAT III Instrument with RS485 port: 1.6 VA - 1 W Instrument with Ethernet port: 4.5 VA - 1.6 W 50/60 Hz Frequency: VOLTAGE INPUTS Voltage range: Safety: Minimum voltage for FFT calculation: CURRENT INPUTS Maximum value: 3x10/17 ... 3x285/495 VAC 300 V CAT III 20/35 VAC (multiplied by PT ratio in case of PT use) with direct connection 1/5A CT model: 6A 80A model: 80A 1/5A CT model: 2 mA 80A model: 20 mA 1/5A CT model: 0.04 VA 1/5A CT model: 100 mA * CT ratio 80A...

Network Analyzers COMMUNICATION PORT APPARENT EN. with SIGN BIT in Modbus COUNTER (VAh) SEPARATED RS485 ETHERNET Ind&Cap REMOTE MANAGEMENT OPTIONS AVAILABLE ONLY ON REQUEST ( MOQ 30 PCS ) 2'S COMPLEMENT for sign representation in Modbus protocol TOTAL apparent energy counters (Ind+Cap) To be indicated together with the selected order code from the list above. Reduced parameter set and functions - 1MB memory, active&reactive power AVG recording. Extended parameter set and functions - 8MB memory, real time parameters MIN/AVG/MAX recording (up to 24 parameters programmable), energy counter...