UEM6C
4Pages

UEM6C ‹UEM6C-4A R, UEM6C-A M, UEM6C-4A E, UEM6C-4D R, UEM6C-D M, UEM6C-4D E› 6A three phase energy meter with built-in communication • Available built-in communication: RS485 Modbus RTU/ASCII or M-Bus or Ethernet (Modbus TCP) Fully bi-directional 4-quadrant measurements for all energies and powers For 4 wire networks with balanced or unbalanced load. M-BUS model can be used also for 3 / 4 wire networks 8 MB for data recording and automatic/manual data transferring (only ETHERNET model) S0 output for energy pulse emission Available with MID certification » General features 4 DIN modules energy meter for the energy measurement in industrial and civilian application, with the following built-in communication, according to the model: RS485 Modbus RTU/ASCII, M-Bus or Ethernet Modbus TCP. Available with MID certification suitable for billing. Besides the energy, the meter can measure the main electrical parameters and makes them available on the built-in COM port. The LCD display shows the energies and the instantaneous powers. The COM port allows to manage the connected meter by a remote station. Data is transmitted on a RS485, M-Bus or Ethernet line according to the device model. Moreover, a dedicated application for remote management is provided: • Modbus Master software > for energy meter management by PC in RS485 Modbus or Ethernet network. • M-Bus Master software > for energy meter management by PC in M-Bus network. • Web server > built-in interface for energy meter management by PC in Ethernet network. Moreover, it allows to enable a data recording and a manual or automatic data transferring. In case of automatic transferring, data is sent to a remote server at the set time schedule. The meter is built according to EN 50470-1 standard. The active energy is compliant to IEC 62053-22 class 0,5 S, but for MID certified device it moreover fulfills class C requirements according to EN 50470-3. The accuracy of reactive energy is compliant to IEC/EN 62053-23 class 2. Wide backlighted LCD display with clear graphic symbols comprehensible at a glance. Metrological LED on front panel and sealable terminal covers. The analysis of the MTBF values, the accurate selection of components and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with an excellent quality and a long lasting reliability. Totalization of the electric energy in the industry for each single line or machine. Measurement of energy generated by renewable sources such as solar, eolic, etc. Accounting and billing of consumptions in camp sites, malls, residential areas, naval ports, etc. Totalization of the electric consumption in hotels, congress centers, exhibition fairs. Accounting of the consumptions in buildings with executive office services. Internal allocation of the consumptions in timeshare civilian and industrial buildings. Realization of energy monitoring systems. Remote survey of the consumptions and compute of the costs. Remote management through dedicated application/ interface according to the device model (RS485 Modbus, M-Bus, Ethernet). Up to 30 instantaneous measurements, complete set of energy counters and partial counters. Moreover partial counters can be started, stopped or reset. Suitable for CT with 1 or 5A secondary. CT ratio is programmable (1 ... 10000). Phase sequence and diagnostic function for error signalling in case of wrong polarity connection. Available MID according to Swiss market (MID S). Reactive energy is not shown on energy meter display. » Related products • • Modbus Master software (for Windows OS) M-Bus Master software (for Windows OS)

» Technical features Power supply • • • Power supplied from the voltage circuit Nominal measurement voltage ±20% Max consumption (for each phase): RS485 MODBUS / ETHERNET models: 3.5 VA - 1 W M-BUS model: 7.5 VA - 0.5 W CT burden (for each phase): 0.04 VA Nominal frequency: 50/60 Hz Voltage range & frequency • • Active energy class C according to EN 50470-3 (MID) Active energy class 0,5 S according to IEC 62053-22 (NO MID) Reactive energy class 2 according to IEC/EN 62053-23 Passive optoisolated Maximum values: 27 VDC - 27 mA Meter constant according to the set CT ratio: 1000 imp/kWh with...

» Measurements In this table, "3 WIRE SYSTEM" column is valid only for M-BUS model. For the other models, only 4 wire system is available. 3 WIRE 4 WIRE COM MEASURE UNIT, DISPLAY PORT VALUE or STATUS SYSTEM SYSTEM Phase voltage Line voltage System voltage Phase current Neutral current System current Phase power factor System power factor Phase apparent power System apparent power Phase active power System active power Phase reactive power System reactive power Phase sequence Power direction Phase active energy System active energy Phase inductive and capacitive reactive energy System...

UEM6C VOLTAGE AND FREQUENCY INPUT INPUTS/ OUTPUTS TARIFF input COMMUNICATION PORT RS485 MODBUS LEGEND MID: MID certified meter, with reset function only on partial counters. MID S: MID certified meter, with reset function only on partial counters, without reactive energy counters on display (only SWITZERLAND NO MID: Meter without MID certification, with reset function only on partial counters. RESET: Meter without MID certification, with RESET function on ALL counters. Softwares for meter remote management (MODBUS Master, M-BUS Master) downloadable for free at www.algodue.com Some models...