80A single phase 2 wire energy meter • Fully bi-directional 4-quadrant measurements for all energies and powers Tariff input 2 S0 outputs for energy pulse emission LCD display with 7 main digits IR optical port for communication Available with MID certification » General features 2 DIN modules energy meter for the energy measurement in industrial and civilian application, available with MID certification suitable for billing. Combined with different external modules, the meter can communicate with other systems. COM modules are available for the most common field protocols. Besides the energy, the meter can measure the main electrical parameters and makes them available on the IR port. The LCD display shows the energies and the instantaneous powers. The meter is built according to EN 50470-1 standard. The active energy is compliant to IEC/EN 62053-21 class 1, but for MID certified device it moreover fulfills class B requirements according to EN 50470-3. The accuracy of reactive energy is compliant to IEC/EN 62053-23 class 2. Wide backlighted LCD display with clear graphic symbols comprehensible at a glance. Metrological LED on front panel and sealable terminal covers. Available versions with different voltage working range for the connection on 2 wire network. The analysis of the MTBF values, the accurate selection of components and the reduction of the internal working temperatures together with strict production and control standards guarantee a product with an excellent quality and a long lasting reliability. Totalization of the electric energy in the industry for each single line or machine. Measurement of energy generated by renewable sources such as solar, eolic, etc. Accounting and billing of consumptions in camp sites, malls, residential areas, naval ports, etc. Totalization of the electric consumption in hotels, congress centers, exhibition fairs. Accounting of the consumptions in buildings with executive office services. Internal allocation of the consumptions in timeshare civilian and industrial buildings. Realization of energy monitoring systems. Remote survey of the consumptions and compute of the costs. Up to 10 instantaneous measurements, complete set of energy counters with 2 tariffs total and partial counters. Moreover partial counters can be started, stopped or reset. Available MID according to Swiss market (MID S). Reactive energy is not shown on energy meter display. » Related products • Communication modules (RS485 Modbus, M-Bus, Lan ga

» Technical features Power supply • • • • Voltage range & frequency • Power supplied from the voltage circuit Nominal measurement voltage ±20% Max consumption: 7.5 VA - 0.5 W Nominal frequency: 50/60 Hz 2 passive optoisolated Maximum values: 250 VAC-DC - 100 mA Meter constant: 500 imp/kWh Pulse length: 50 ±2ms ON time Energia attiva classe 1 secondo IEC/EN 62053-21 (NO MID) Energia attiva classe B secondo EN 50470-3 (MID) Energia reattiva classe 2 secondo IEC/EN 62053-23 Starting current Ist: 20 mA Minimum current Imin: 250 mA Transitional current Itr: 500 mA Reference current Iref (Ib): 5 A...

» Measurements SYMBOL MEASURE UNIT, VALUE or STATUS Power factor Apparent power Active power Reactive power Power direction INSTANTANEOUS VALUES RECORDED DATA Total active energy Total inductive and capacitive reactive energy Total inductive and capacitive apparent energy T1/T2 tariff energy counters Resettable partial energy counters Energy balance OTHER INFORMATION Present tariff Partial counters Active/Not active

UEC80-2D VOLTAGE AND FREQUENCY INPUT INPUTS/ OUTPUTS COMMUNICATION PORT TARIFF input POWER SUPPLY M-BUS M-BUS USER MANUAL LANGUAGES COMMUNICATION PORT COMMUNICATION MODULES LEGEND IR: IR port. This port allows to combine the meter with the communication module (not included). MID: MID certified meter, with reset function only on partial counters. MID S: MID certified meter, with reset function only on partial counters, without reactive energy counters on display (only SWITZERLAND NO MID: Meter without MID certification, with reset function only on partial counters. RESET: Meter without MID certification,...