energy meters Catalogue

ALGODUE ENERGY METERS Cover of the sealable terminals Wide LCD display Buttons for configuration and display of measurements

RENEWABLE ENERGY To measure the electrical energy produced by hydroelectric, wind, geothermal, photovoltaic, etc. production plants and to invoice this data, the best option is an Algodue energy meter. CHARGING STATIONS FOR ELECTRIC VEHICLES The market for electric vehicles is constantly expanding and there is a growing need for charging stations. In order to account for electricity consumption inside each charging station, energy meters are needed. Algodue has been chosen by some of the most prestigious manufacturers of charging stations because the characteristics of his energy meters are perfect...

Information management Remote management Monitoring the points and periods of higher electricity consumption allows you to quickly identify sources of energy wastage. Algodue UEM meters allow the creation of a centralised communication network for the control and automatic transfer of consumption data. Tariff management Pulse counting Algodue meters equipped with a tariff input (all Modbus RS485 models) allow the consumption of active, reactive and apparent energy to be split into two separates tariff registers to optimise energy costs. Thanks to the S0 output for pulse emission, Algodue meters...

ALGODUE BENEFITS Free software Active energy class B or C according to EN 50470-3. Superior accuracy even at low currents. The MODBUS MASTER software can be downloaded free of charge from www.algodue.com and allow full management of the energy meter. Ethernet version Installation diagnostics The Ethernet version of the Algodue meters has a built-in webserver, memory (8M) and allows manual or automatic transfer of recorded data via a predefined and FREE FTP PUSH protocol. Algodue meters indicate the phase sequence and diagnostics of signal polarity errors in connection, in order to ensure correct...

THE MOST COMPLETE RANGE OF ENERGY METERS MADE IN ITALY ON THE MARKET Algodue’s wide range of energy solutions includes single-phase and three-phase meters for consumption measurement and control, with certification: UEM RANGE for remote management via built-in communication port MODEL VERSION SINGLE PHASE THREE PHASE CURRENT INPUTS TARIFF INPUT INPUTS / OUTPUTS VOLTAGE AND FREQUENCY INPUT SELF-POWERED ACCURACY CLASS

THREE PHASE & SINGLE PHASE S0 OUTPUT FOR PULSE EMISSION • With built-in communication • Remote management • Bi-directional measurements in 4 quadrants • Easy and quick to install and set up • Extremely compact • Large LCD display with backlit • Single phase: direct connection up to 40A and 80A • Three phase: 1/5A with CT • Three phase: direct connection up to 80A • Ex

UEM40 UEM40-2N R UEM40-2P R UEM40-2Q R UEM40-2R R 40A single phase energy meter with built-in communication • For RS485 Modbus RTU communication • Direct connection up to 40 A • Fully bi-directional 4-quadrant measurements for all energies and powers • High reliability • 1 DIN module compact size • Quick installation • S0 output for energy pulse emission • LCD display with 7 main digits Power supply • Power supplied from the voltage circuit • Nominal measurement voltage ±20% • Max consumption: 1.5 VA - 1 W • Nominal frequency: 60 Hz • Port: RS485 • Protocol: Modbus RTU • Communication speed:...

UEM80-2N UEM80-2p UEM80-2Q UEM80-2R 80A single phase energy meter with built-in communication • For RS485 Modbus RTU/ASCII or Ethernet (Modbus TCP) communication, according to the model • 8 MB for data recording and automatic/manual data transferring (only ETHERNET model) • S0 output for energy pulse emission • Fully bi-directional 4-quadrant measurements for all energies and powers • LCD display with 7 main digits Technical features Power supply S0 output (no ETHERNET model) • Power supplied from the voltage circuit • Nominal measurement voltage ±20% • Max consumption: 7.5 VA - 0.5 W • Nominal...

UEM1P5-4N UEM1P5-4p UEM1P5-4q UEM1P5-4r 6A three phase energy meter with built-in communication • For RS485 Modbus RTU/ASCII or Ethernet (Modbus TCP) communication, according to the model • For 1 or 5A CT • Programmable CT ratio • Fully bi-directional 4-quadrant measurements for all energies and powers • For 4 wire networks with balanced or unbalanced load • S0 output for energy pulse emission • 8 MB for data recording and automatic/manual data transferring (only ETHERNET model) Technical features Power supply Ethernet communication • Power supplied from the voltage circuit • Nominal measurement...

UEM6C-4N UEM6C-4P UEM6C-4Q UEM6C-4R 6A three phase energy meter with built-in communication IEC 62053-22 • For RS485 Modbus RTU/ASCII or Ethernet (Modbus TCP) communication, according to the model • For 1 or 5A CT • Programmable CT ratio • Fully bi-directional 4-quadrant measurements for all energies and powers • For 4 wire networks with balanced or unbalanced load • 8 MB for data recording and automatic/manual data transferring (only ETHERNET model) • S0 output for energy pulse emission Technical features Power supply Ethernet communication • Power supplied from the voltage circuit • Nominal...

UEM80-4N UEM80-4P UEM80-4Q UEM80-4R 80A three phase energy meter with built-in communication • For RS485 Modbus RTU/ASCII or Ethernet (Modbus TCP) communication, according to the model • For 4 wire networks with balanced or unbalanced load. M-BUS model can be used also for 3 / 4 wire networks • 8 MB for data recording and automatic/manual data transferring (only ETHERNET model) • S0 output for energy pulse emission Power supply Ethernet communication • Power supplied from the voltage circuit • Nominal measurement voltage ±20% • Max consumption (for each phase): 3.5 VA - 1 W • Nominal frequency:...