MAGNETIC AND LIFTING TECHNOLOGY ALFRA-PRESS HYDRAULIC PUNCHES LOAD-LIFTING - FLAT STEEL TMH 50 Prod.-No. Max. load-bearing capacity Breakaway force Min. material thickness Dead weight Contact area L x W Dimensions L x W (closed lever) SPECIAL SOLUTIONS POSITIONING/ INDIVIDUALIZATION FOR ROUND FOR FLAT STEEL STEEL AHP-M: approx. 5 sec. AHP-L: approx. 3 sec. 70 mm (2 3/4") AHP-M: approx. 10 sec. AHP-L: approx. 7 sec. 110 mm (4 3/8") Punching force Punch stroke Weight Prod.-No. Max. hole-Ø Max. oblong hole Max. material thickness (S235) Overall punch time with pump ... Jaw depth LOAD-LIFTING - ROUND STEEL ANGLE FIXING 0° - 90° Hose assembly 5 m/spanner Punch/ Hose assembly 5 m/spanner Punch/ die Ø 18 mm Depth adjustment, die Ø 22 mm Depth adjustment, suspension bracket suspension bracket Prod.-No. Pipe diameter Holding force Dead weight 249 x 180 mm (9 13/16" x 7 1/16") (with levers, magnets are parallel) Breakaway force Contact area L x W Dimensions L x W (closed lever) Filling volume Weight incl. oil filling Operating voltage Power Tip: This generates enormous time savings, especially when punching at identical space intervals, as the measurement needs only to be set once, and the interval lengths are easy to measure. Technical data SERVICE-BOY PUNCH ■ For practical cleaning of floors in various work areas ■ Load capacity up to 9 kg ■ Easy removal of picked up metal parts by simple release mechanism on a rod ■ Sweeping with 400 mm ■ 750 - 1050 mm adjustable telescopic handle • For all types of APS hydraulic punching units • APS GO enables you to easily move our punching units over the steel bar • An adapter plate connects the punching unit to the moving system, and allows this to be removed at any time. • Massive, solid heavy-duty rollers and the side-mounted hand grips enable completely effortless movement over the steel bar. ALFRA – MAGNETIC CHIP REMOVER ALFRA – CHIP BRUSH In a stainless steel round rod, you can move a magnet back and forth. The strong magnet attracts the metal chips – pull knob, chips fall out. For more cleanliness in the workplace. Length 400 mm 1 Adjustable telescopic handle 2 Up to 9 kg load capacity AHP-M Prod.-No. DIES Prod.-No. • Gas pressure shock absorbers allow the easy positioning of the punching head on the steel bar • The hydraulic pump remains on the trolley, and must not be dragged along behind you • Work tool cabinet with drawers for the clear arrangement of punching work tools and accessories • Solid and secure – and more cost-effective than any "DIY-build" Tip: This practical, time and energy-saving trolley makes handling of our ALFRA Press hydraulic punching units much easier. Absolutely necessary for every steel and metal worker wherever punching units are already in use. Prod.-No. Pipe diameter Max. load-bearing capacity Breakaway force Subject to our general sales conditions. 04/2023 Min. material 1 mm (1/32") 1 mm (1/32") 2 mm (1/16") thickness Dead weight 1.6 kg (3.5 lbs) 1.8 kg (4 lbs) 8.2 kg (18 lbs) Contact area 82.5 x 80 mm 82.5 x 80 mm 248 x 95 mm LxW (3 1/4" x 3 1/8") (3 1/4" x 3 1/8") (9 3/4" x 3 3/4") Dimensions L x W 190 x 124 mm 146 x 124 mm 295 x 118 mm (closed lever) (7 1/2" x 4 7/8") (5 3/4" x 4 7/8") (11 5/8" x 4 5/8") *Max. load-bearing capacity on round pipes: 20 - 50 % of flat material subject to pipe diameter and material thickness *) with lock nut, Prod.-No. 23004-056 B When selecting your tool, please note: For material DIN S233: maximum material thickness = 0.8 x hole Ø For material DIN S275: maximum material thickness = 0.5 x hole Ø Technical Data Prod.-No. 23160 (without punching unit / pump + accessories) 23160 900 x 520 x 1,970 mm (without punching unit and pump) 70 kg / 154.3 lbs. (without Punch and Pump)

ALFRA ROTABEST® CORE DRILLING MACHINES WITH ELECTROMAGNET ALFRA ROTABEST® CORE DRILLING MACHINES WITH ELECTROMAGNET WITH R/L-RUN ALFRA ROTABEST® CORE DRILLING ALFRA ROTABEST® THE DUO FOR MACHINES WITH PERMANENT MAGNET SPECIAL OPERATIONS ALFRA ROTABEST® HSS CORE DRILLS cutting depth: 30 mm Ø 12 mm - 60 mm cutting depth: 50 mm Ø 12 mm - 60 mm RB 35 B Prod,-No, Core drill dimensions Cutting depth Twist drill Counterboring Tapping Ø 1.0 to 16.0 mm with quick-release chuck MT 2 up to Ø 20.0 mm with MT2 DIN 345 direct Ø 1.0 - 16.0 mm with drill chuck up to Ø 32.0 mm with MT3 DIN 345 with tapping attachment:...