ALFRA HOLE PUNCHES® FORMCUT® & FORMCUT+® RECTANGULAR ALFRA HOLE PUNCHES® FORMCUT® & FORMCUT+® SQUARE FOR STAINLESS STEEL (VA) FOR SHEET STEEL (S235) FOR SHEET STEEL (S235) Size in mm ALFRA PROFILE RAIL CUTTING DEVICE® ● ● 12,7 x 12,7 ● ● 15,8 x 15,8 ● ● 19,0 x 19,0 ● ● 21,3 x 21,3 ● ● 22,2 x 22,2 ● ● 24,0 x 24,0 ● ● 25,4 x 25,4 ● 45,5 x 45,5 ● 46,0 x 46,0 ● 50,8 x 50,8 ● 68,0 x 68,0 ● 92,0 x 92,0 ● 125,0 x 125,0 ● 138,0 x 138,0 Other dimensions available upon request Hole punch FormCut® - rectangular - for heavy plug connectors Prod.-No. Copper ground rails 10 mm x 3 mm Punching function long and transverse hole Custom-made products Hole punch - square Hole punch FormCut® - rectangular ALFRA CABLE DUCTING CUTTING DEVICE VKS 125® Cuts cable ducting and covers up to 125 mm wide in seconds precisely and without effort. Fixing tabs for easy fitting to the workbench are attached to the device and to the longitudinal limit stop. The VKS 125 is fitted with a sprung cutter protector which covers the cutter when it is not being used. • • • • Burr-free cutting to length without waste 90° angle-precise cutting Maintenance-free Easy to install on the workbench „...no more plastic swarf and no more deburring!“ Alfra GmbH | 2. Industriestraße 10 | D-68766 Hockenheim www.alfra.de | [email protected]

ALFRA HAND-OPERATED HYDRAULIC PUNCHES ALFRA HOLE PUNCHES® FOR STAINLESS STEEL (VA) FOR SHEET STEEL (S235) ALFRA HOLE PUNCHES MonoCut ® ALFRA COMPACT® ALFRA COMPACTCOMBI® ALFRA COMPACT FLEX® ALFRA AKKU-COMPACT FLEX® punching force tool mounting Hydraulic medium Weight ALFRA HOLE PUNCHES® FOR STAINLESS STEEL (VA) FOR SHEET STEEL (S235) ALFRA HOLE PUNCHES MonoCut® ALFRA HOLE PUNCHES TriCut® ALFRA HOLE PUNCHES TriCut+® Material thickness when using Ø 6 mm draw bolt Diameter custom-made products Machining possibilities using wrench or ratchet Hydraulic drive size Inch size Conduit & Pipe Size with...