LabStak for membrane filtration M37-38
1 /3Pages

Catalog excerpts

. kyPilot Laboratory Equipment for Membrane Filtration LabStak® M37/38 . The LabStak® M37/38 is ideal for process development, scale-up, membrane testing, quality assurance and smallscale production. It can be fitted with the whole range of flat sheet membranes for ultrafiltration and microfiltration. The LabStak® M37/38 is designed to provide rapid, precise evaluations in laboratories or other test facilities, while keeping equipment and set-up costs to a minimum. The module utilizes the same size support plates and membranes as those found in the full-scale plate-and-frame systems. Advantages • Rapid, easy exchange of membranes • Can be coupled to the by-pass stream of an industrial plant • Different channel height options to optimize flow and pressure • Simultaneous test of up to seven different membrane types • Lowinternalvolume • All components manufactured in compliance with FDA regulations • Flexiblesystemdesign • Flexible membrane area between 0.11 and 1.05 m2 • High operating temperature (up to 80°C). Plate set options The module consists of a full-size plate-and-frame cross-flow membrane filtration module, type LabStak® M37/38. The module can be equipped with alternative plate set configurations, according to use. M37 Ideal for highly viscous liquids, code no. PL 745 M38H High channel, for medium viscous liquids, code no. PL 777 M38L Low channel, ideal for low viscous liquids, code no. PL 741 2 B 350 373 C A 1 483 TD 710-043 All dimensions are in mm Pos. Description of parts included 1. Steel frame 2. Support plates and membranes A. Feed inlet B. Retentate outlet C. Permeate outlet

Open the catalog to page 1

LabStak for membrane filtration M37-38 -2

LabStak M37/38 TD 710-041 A B C D E H K J G F A = Feed F = Flow B = Pump G = Flow C = Pressure H = Permeate D = Pressure J = Control valve E = Temperature K = Retentate Technical data Number of support plates 1-7 Number of section stop discs 2, or 1 less than number of sections Number of end plates 2 Number of flat sheet membranes 2 per support plate Membrane area M37® 0.11-0.77 m2 Membrane area M38H® 0.15-1.05 m2 Number of sections 1, 2 or 3 uniform sections in series Basic liquid capacity = A 0.2 litres Liquid capacity M37 A + 2.1 litres/m2 Liquid capacity M38H A + 1.4 litres/m2 Liquid capacity...

Open the catalog to page 2

LabStak for membrane filtration M37-38 -3

. ESE00643EN 1001 The information contained herein is correct at the time of issue, but may be subject to change without prior notice. How to contact Alfa Laval Contact details for all countries are continually updated on our website. Please visit www.alfalaval.com to access the information direct.

Open the catalog to page 3