LabStak® for membrane filtration M10
1 /2Pages

Catalog excerpts

. kyPilot Laboratory Equipment for Membrane Filtration LabStak® M10 . With a membrane area of only 336 cm2 the LabStak® M10 is the smallest and most compact of the Alfa Laval cross-flow membrane filtration modules. This versatile module is simple to operate and provides reliable results. The LabStak® M10 is the ideal tool for educational purposes and for research and development work. It can be fitted with the whole range of flat sheet membranes for ultrafiltration and microfiltration. Advantages • Rapid, easy exchange of membranes • Transparent plate for observation of flow • Simultaneous test of two different membrane types • High operating temperature (80°C) • Small test media volume • Flow pattern similar to that of larger modules • All components manufactured in compliance with FDA regulations . 130 188 A 1 B C 200 TD 710-076 All dimensions are in mm Pos. Description of parts included 1. Spacers and support plates A. Feed inlet B. Retentate outlet C. Permeate outlet

Open the catalog to page 1

LabStak M10 SC TD 710-034 A B C D E H G F A = Feed E = Permeate B = Cooling/Heating F= Pressure C = Pump G = Retentate D = Pressure H = Control valve Technical data Number of support plates 4/4 Number of flat sheet membranes 4 Membrane area 0.036 m2 Max. inlet pressure* 7 bar Max. operating temperature* 80°C Operating pH range* 1-14 Module weight 3 kg Cross-flow 3-10 l/min. Liquid capacity 57 millilitres *depending on membrane type Module data All external steel Stainless, AISI 304 Internal, product wetted steel Acid resistant, AISI 316L Support and spacer plates Polysulphone (PSO) Permeate outlet...

Open the catalog to page 2