*mydirectindustry

Catalogs
Alfa Laval
Arctigo HRCD

Arctigo HRCD
1 /2Pages

Catalog excerpts

Arctigo HRCDBanana ripening cooler - Airbag / side curtain system General information & application Banana ripening coolers Arctigo HRCD have been designed for application in airbag & side curtain system banana ripening rooms. The coolers have been optimised for 12.5 °C air-on and 11.5 °C air-off temperature at an evaporating temperature of 7 °C. Arctigo HRCD air coolers provide for an even temperature distribution throughout the whole ripening room, guaranteeing that the products are ripened as evenly as possible. Evaporating temp. 7 °C (optimised) Refrigerants all H(C)FC, brine, CO2 Banana rooms 6 to 30 pallets Standard configuration • Finned coil - Cu ripple fin tubing 0 5/8” (smooth tubing for brine) - Tube pitch 50 x 50 mm square - Corrugated Alu-fins. • 3-5 Fans 400/50/3, 0 508 and 550 mm. Cables are led to the outside of the casing. Enclosed design spray-tight fan motors, protection class IP55. Motors are equipped with a thermal safety device in the windings, connected to separate terminals in the box. • Lighting integrated into the cooler casing. • Heater elements • Corrosion resistant casing material: Aluminium/Sendzimir, white epoxy coated (RAL 9002). • Hinged driptrays • Fitted with schrader valve on the suction connection for testing purposes. • Sufficient room for fitting the expansion valve inside. • Suitable for dry expansion or pumped system. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with use of a forklift. Benefits • Application based air cooler design • Full control over the ripening process resulting in perfect product quality. • Heavy duty coil & casing materials • Reliable performance • Easy-install. • Energy efficient. • Low total cost of ownership. • Two-year product guarantee. • Easy access to additional on-line product in

Open the catalog to page 1

r$i HRCD nr. pallet nr. of dim. model of layers pallets A Code description 1 Banana ripening cooler airbag/side curtain system 2 Maximum number of pallets in ripening room 3 Number of pallet layers Design pressure Design pressure 33 bar (H(C)FC) or 10 bar (brine). Each heat exchanger is leak tested with dry air and finally supplied with a nitrogen pre-charge. Please contact our sales organisation for selection and full technical details. AHE00037EN 1701 Alfa Laval is a trademark registered and owned by Alfa Laval Corporate AB. Alfa Laval reserves the right to change specification...

Open the catalog to page 2

Arctigo HRCD1 /2Pages

Arctigo HRCD1 /2Pages

Catalog excerpts

All Alfa Laval catalogs and technical brochures

Arctigo HRCD
1 /2Pages

Arctigo HRCD
1 /2Pages