*mydirectindustry

OPL-403

Product catalog summary

Overview: The document provides technical specifications and ordering information for Meter Runs manufactured by ALF-SENSOR Sp. J. These are used for precise flow measurement in pipelines, adhering to specific standards based on the diameter of the pipeline.

Specifications:

Meter Runs are designed according to EN ISO 5167:2005 for diameters (D) ≥ 50 mm and ASME-MFC-14M-2003 for D < 50 mm.
They are used when measurement accuracy better than 1% is required or when the pipeline diameter is less than 2 inches.
Standard lengths are 900 mm for DN25 (NPS 1”) and 1300 mm for DN40 (NPS 1.5”).

Ordering Information:

Orders are specified using a code that includes details such as nominal pipe diameter, flange rating, internal pipe diameter, bore diameter, material, process fluid state, and any special requirements.
Materials available include SS316L and SS316Ti.
Pressure tap connections can be made via weld pipe, NPT thread, or compression fitting.

Special Requirements:

Options include quality certificates, heat treatment approval, NACE compliance, Charpy V-notch impact testing, bidirectional flow, and additional examinations according to EN 13480.
Non-standard models are available upon request.

Additional Notes:

Buyers can submit their own calculation sheets, or ALF-SENSOR can perform calculations based on a filled FLOW QUESTIONNAIRE.
Internal pipeline diameter may change after strength calculations are prepared.

Catalog excerpts

OPL-403 METER RUN according to EN ISO 5167:2005 for D ≥ 50 mm ASME-MFC-14M-2003 for D < 50 mm Detailed dimensional information is presented on the construction drawings issued by Alf-Sensor for approval. Meter runs are used in two cases: 1. Required measurement accuracy is better than 1% DN of pipeline (or measuring section) <2”. In this case computations should be executed according to ASME-MFC-14M-2003 standard. Note: Buyer shall submit calculation sheet of element, if done by him. Otherwise Al-Sensor can make calculation on the base of FLOW QUESTIONNAIRE filled in by Buyer. METER RUN, remote dP transmitter connection METER RUN, compact dP transmitter connection The standard lengths of Meter Run is 900mm for DN25 (NPS 1”) and 1300 for DN40 (NPS 1,5”) ALF-SENSOR Sp. J. seat: ul. Narcyzowa 3, 31-342 Kraków manufacturing plant: ul. Krakowska 294, 32-080 Zabierzów Phone: (+48) 12 258 08 40 | Fax: (+48) 12 258 08 48 | E-mail: [email protected] www.alf-sensor.com © Copyright ALF-SENSOR Sp. J. , 2

Open the catalog to page 1

1^ Nominal Pipe Diameter, DN or NPS F Process Fluid State liquid * Bore diameter is calculated by Alf-Sensor on the base of FLOW QUESTIONNAIRE filled in by Buyer Note: Internal diameter of pipeline could be changed after preparing strength calculations OPL-403-DN40-PN40/B1-40,2-30,02-1.4404-steam-compact stands for: Meter run, Nominal pipe diameter DN40, Flange PN40 / facing B1 acc. EN 1092-1, Internal pipe diameter (Alf-Sensor standard) 38,30 mm, Bore 30,02 mm, Material 1.4404 = SS316L, Process fluid : steam, Compact connection to Parker make 3-valve manifold HEFS3, Special requirements: None,...

Open the catalog to page 2

All Alf-Sensor catalogs and technical brochures

TOP-Exd-PKGz-236
2 Pages
TER-Exd-PKGz-238
2 Pages
TOP-PKG-04
2 Pages
alf sensor
315 Pages