Low maintenance high performance batteries ADVANCED SOLUTIONS ENGINEERING EXCELLENCE

Low maintenance, high performance Ni-Cd batteries Powerful assurance for critical applications depend upon XHP where vital UPS, engine starting and emergency back-up duties need guaranteed power in an instant. The built-in reliability of sintered/pbe technology and alkaline electrolyte provides up to 20+ years of cost-effective trouble-free service, requiring virtually no maintenance. Future-proof construction Best for engines – perfect for UPS XHP’s steel superstructure and tough polypropylene casing hold sintered and plastic-bonded electrodes with copious amounts of alkaline electrolyte. As...

Bayonet flamearrester vent plug Large electrolyte reserve with visible levels Plastic-bonded negative electrode Separator Sintered positive electrode Rapid charging characteristics ( + 20 ˚ C ± 5 ˚ C /+ 68 ˚ F ± 9 ˚ F) XHP can be charged by all normal methods: With boost The rated capacity(C 5 ) of a cell is the capacity available in ampere-hours (Ah) at the 5 hour discharge rate to an end voltage of 1.00 V/cell. Maintenance float voltage: 1.40 ± 0.01 V Boost voltage range: 1.45 V ± 0.01 V Constant current Nominal discharge voltage Without boost Constant voltage The nominal discharge voltage is...

Capacity and dimensions XHP Capacity Length per cell Width per cell Overall height type at the H H H Approx. weight per cell Alcad XHP batteries fulfil all requirements specified by IEC publication 60623 Flame retardant (F) option available. Please add 1.5% to dimensions.

Data for stationary applicationsPerformance after prolonged float charge of fully charged cells Available amperes at + 20°C ± 5°C/+68°F ± 9°F Final voltage: 1.00 V/cell Final voltage: 1.05 V/cell

XHPData for stationary applicationsPerformance after prolonged float charge of fully charged cellsAvailable amperes at +200C ± 5°C/+68°F ± 90F Final voltage: 1.10 V/cell Available amperes at +20°C ± 5°C/+68°F ± 9°F Final voltage: 1.14 V/cell

Data for engine starting applicationsPerformance for fully charged cells by a constant current charge according to IEC 60623 standard Available amperes at + 20°C ± 5°C/+68°F ± 9°F Final voltage: 0.65 V/cell XHP type Available amperes at +20>C ± 5°C/+68°F ± 90F Final voltage: 0.85 V/cell XHP type

Alcad Limited Headquarters United Kingdom Document X3.0.E.0117 - Edition: January 2017 - Finedesign - Photo credits: Alcad, Fotolia © Alcad Alcad Sales Offices