Vantex New low maintenance battery range data
Vantex New low maintenance battery range data
Vantex low maintenance Ni-Cd batteries are engineered for demanding environments such as offshore oil and gas, utilities, and remote locations where maintenance is challenging and expensive. These batteries are known for their reliable performance, longevity, and minimal upkeep, especially in high-temperature settings.
The Vantex series includes Ni-Cd batteries with capacities ranging from 8 Ah to 1700 Ah, available in two types: L RANGE for low discharge durations (3-100 hours) and M RANGE for mixed loads (30 minutes to 3 hours).
Vantex batteries surpass IEC 62259 endurance tests by over four times, maintaining reliability at temperatures up to +40°C (+104°F) and in extreme conditions from -40°C to +70°C (-40°F to +158°F). They have a service life expectancy of over 12 years at +40°C and over 20 years at +20°C.
These batteries support single or two-level charging methods, with a single level charge at 1.43 ± 0.01 V/cell. They require only one top-up during their service life due to efficient gas recombination exceeding 90%.
Vantex batteries are manufactured to ISO 9001 and ISO 14001 standards, complying with IEC 62259 and EN 50272-2 safety requirements. They include features like insulated cable connectors to prevent electric shocks.
Alcad is committed to environmental care throughout the lifecycle of Vantex batteries, from design to recycling. The batteries are recyclable, and Alcad partners with global agencies for battery collection and recycling.
The document provides detailed tables of physical dimensions, weight, and internal resistance for both L and M range batteries, along with performance metrics after prolonged float charge.
Detailed specifications for Vantex C5 battery cells are provided, including performance metrics across various time intervals (from 1 second to 10 hours) at different final voltages (1.10 V/cell and 1.14 V/cell) for cell capacities ranging from 8 Ah to 1330 Ah.
Performance is measured in available amperes at a temperature of +20ºC ± 5ºC, with tables showing performance after prolonged float charge of fully charged cells.
The document outlines the conditions under which the performance data is applicable, specifically noting the temperature and final voltage conditions.
Contact details for Alcad Limited and its sales offices in Sweden, the United Kingdom, the Middle East, Asia, and the USA are provided, including telephone and facsimile numbers.
The document includes a disclaimer that data is subject to change without notice and becomes contractual only after written confirmation by Alcad.
Catalog excerpts
Low maintenance Ni-Cd batteries >
Open the catalog to page 1
Long life at high temperatures Vantex shows good endurance with excellent results, with both cell types exceeding by more than 4 times the endurance test of IEC 62259. > The battery performs reliably at temperatures of up to +40C (+104аF), and in extreme conditions to -40C and +70аC (-40F and +158аF). Vantex has a service life expectancy of 12 plus years at +40C (+104аF) and of 20 plus years at +20C (+68аF). It can never suffer from sudden deathђ owing to the total reliability of Ni-Cd electrochemistry.Additionally, M type cells achievemore than In off-shore oil and gas applications, utilities,...
Open the catalog to page 2
Only one top-up during life The Vantex design enables highly efficient gas recombination of more than 90% far beyond therequirements of IEC 62259 ֖ allowing very low gas emissions and water consumption. As a result, Vantex may require only one topping-up operation during its entire service life. Easy to handle The optimised design of Vantex includes several features to make transportation, installation and operation fast and easy.Up to six cells are configured in series and assembled in blocks to enable easy handling. As Vantex cells are always factory-filled with electrolyte, rapid installation...
Open the catalog to page 3
Vantex Capacity Height Width > Approx. Internal Cell type weight resistance* connection per cell bolt per pole C > 5 1 cell 2 cells 3 cells 4 cells 5 cells 6 cells Ah mm in mm in mm in mm in mm in mm in mm in mm in kg lb mOhm >
Open the catalog to page 6
Vantex Capacity Height Width > Approx. Internal Cell type weight resistance* connection per cell bolt per pole C > 5 1 cell 2 cells 3 cells 4 cells 5 cells 6 cells Ah mm in mm in mm in mm in mm in mm in mm in mm in kg lb mOhm >
Open the catalog to page 7
VTX 2.1 Edition : June 2008. Produced by Arthur Associates.Photo credits: Alcad, Alstom/Phillipe GUIGNARD, DigitalVision, Bob Fleumer, Photodisc. Data in this document are subject to change without notice and become contractual only after written confirmation by Alcad. Alcad LimitedSweden Telephone: +46 491 68 100 Facsimile: +46 491 68 110 Alcad Sales Offices United Kingdom Telephone: +44 1279 772 555 Facsimile: +44 1279 420 696 Middle East Telephone: +357 25 871 816 Facsimile: +357 25 343 542 Asia Telephone: +65 6 7484 486 Facsimile: +65 6 7484 639 USA Telephone: +1 203 234 8333 Facsimile: +1...
Open the catalog to page 16All ALCAD Ltd catalogs and technical brochures
AT10.1 SERIES8 Pages
Rack Range Ni-Cd batteries8 Pages
New Vantex2 Pages
XHP Range8 Pages
Vantage Rang8 Pages
Alcad Services8 Pages
Alcad Corporate Brochure8 Pages
Alcad Single Cell Range32 Pages
Vantex New Generation12 Pages
Solar Range8 Pages
HC P Range27 Pages
Archived catalogs
Pocket Plate Range Data27 Pages
