DC66P Heavy Duty D.C. Monoblock Reversing Contactors 8 Series of D.C. Contactors

Product catalog summary

Specifications:
- Thermal Current Rating: Up to 80 Ampere
- Reduced Duty Cycle Rating:
    30% - 150 Ampere
    40% - 125 Ampere
    50% - 115 Ampere
    60% - 105 Ampere
    70% - 95 Ampere
- Inductive Fault Currents: 500 Amperes at 60V D.C.
- Maximum Recommended Contact Voltages: 48V D.C.
- Typical Voltage Drop: 15mV
- Mechanical Life: >3,000,000 cycles
- Coil Power Dissipation:
    Intermittently Rated (50% Duty Cycle): 10 - 14 Watts
    Intermittently Rated (25% Duty Cycle): 14 - 21 Watts
    Continuously Rated: 5 - 7 Watts
- Maximum Pull-in Voltage:
    Intermittently Rated: 60%V
    Continuously Rated: 66%V
- Typical Drop-out Voltage: 10-25%
- Typical Pull-in Time: 15ms
- Typical Drop-out Time:
    Without Suppression: 6ms
    With Diode Suppression: 35ms
- Typical Main Contact Changeover Time: 6ms
- Typical Contact Bounce Period: 3ms

Product Overview:
The DC66P is a new addition to the SW60 range of 80 Ampere Contactors, designed for motor reversing. It is sealed to IP66 standards, making it suitable for small battery-powered winches, vehicle-mounted cranes, and small electric vehicles.

Installation and Maintenance:
- M6 main terminals should be tightened within the range of 3.6 to 3.9Nm.

Environmental and Compliance:
Albright is registered under BS EN ISO 14001 for Environmental Management. For disposal information, contact the Health, Safety & Environmental Manager of your local supplier.

Contact Information:
Albright International Limited, 125 Red Lion Road, Surbiton, Surrey KT6 7QS, England
- Website: www.albright.co.uk
- Tel: +44 (0) 20 8390 5357
- Fax: +44 (0) 20 8390 1927
- Email: [email protected], [email protected]

Note: All performance data provided should be used as a guide only. Some de-rating or variation may be necessary according to type and application.

Catalog excerpts

DC66P Heavy Duty D.C. Monoblock Reversing Contactors 8 Series of D.C. Contactors-1

Thermal current Rating (100%): Up to 80 Ampere Reduced Duty Cycle Rating: Typical Inductive Fault Currents that can be ruptured 30% - 150 Ampere 40% - 125 Ampere 50% - 115 Ampere 60% - 105 Ampere 70% - 95 Ampere (5ms time Constant): 500 Amperes at 60V D.C. Maximum Recommended Contact Voltages: 48V D.C Typical Voltage Drop across New Contacts: 15mV Mechanical Life: > 3,000,000 Coil Power Dissipation: Intermittently Rated Types (50% Duty Cycle): 10 - 14 Watts Intermittently Rated Types (25% Duty Cycle): 14 - 21 Watts Continuously Rated Types: 5 - 7 Watts Maximum Pull-in Voltage (Coil at 20 E C): Intermittently Rated Types: 60%V Continuously Rated Type: 66%V Typical Drop-out Voltage: 10-25% > Typical Pull-in time (n/o contacts to close): 15ms Typical Drop-out time (n/o contacts to Open): Without Suppression: 6ms With Diode Suppression: 35ms Typical Main Contact Changeover Time: Normally Closed to Normally Open: 6ms Normally Open to Normally Closed: 6ms Typical Contact Bounce Period: 3ms > Albright is registered under BS EN ISO 14001җEnvironmental Management System. Should you require information on the disposal of our prod-ucts, please contact the Health, Safety & Environ-mental Manager of your Local Supplier for Disposal Guidance Note.

Open the catalog to page 1