ALP Peristaltic Pumps

Product catalog summary

Overview: The document is a technical data sheet for Albin Pump ALP series peristaltic pumps, detailing specifications, dimensions, and operational guidelines for various models including ALP09N, ALP13N, ALP17N, ALP25N, ALP30N, and ALP45N.

Specifications: Each pump model is described with precise dimensions in millimeters and inches, including size parameters such as A, B, C, etc. The pumps are available in fixed speed (F) and mechanical speed variator (VM) versions. The pressure limit is 4 bar (60 psi) with reinforced hoses and 2 bar (30 psi) with tubing.

Operational Guidelines: The pumps can operate continuously, intermittently, or occasionally. Intermittent use requires a minimum one-hour stop after two hours of operation, while occasional use is limited to one hour per day. Flow rates and pump speeds are provided for each operational mode.

Performance Data: Flow rates are given in liters per hour (lph) and gallons per hour (gph) for smaller models, and cubic meters per hour (m3/h) and gallons per minute (gpm) for larger models. Conversion factors are provided for rpm to flow rate calculations.

Weight and Power: Assembly weights range from 12 kg (26 lbs) for smaller models to 155 kg (342 lbs) for larger models. Installed power requirements are specified in kilowatts (kW) and horsepower (HP).

Company Information: Albin Pump is part of Ingersoll Rand's Precision and Science Technologies segment, which includes other brands like Milton Roy, ARO, and Dosatron. The company focuses on precision dosing and fluid transfer solutions across various markets.

Catalog excerpts

ALBIN PUMP ALP Peristaltic Pumps / Technical Data Sheet

Open the catalog to page 1

Data Sheet Pump speed (rpm) Vitesse pompe (tr/min) Flow: lph Débit (l/h) Intermittent* Intermittente* Occasionnelle* Occasional* *Intermittent use : minimum one hour stop after 2 hours run / *Occasional use : maximum one hour a day * 4 bar (60 psi) pressure limit is applicable when using a reinforced hose. The pressure limit when using tubing is 2 bar (30 psi) 2 [email protected] Albinpump.com Albin Pump ALP Technical Datasheet * Hose barb * F = Fixed speed * VM = Mechanical speed vari

Open the catalog to page 2

Vitesse pompe (tr/min) Pump speed (rpm) Débit (l/h) Flow: lph (gph) Intermittent* Intermittente* Intermittent* Occasionnelle* Occasional* Occasional* *Intermittent use : minimum one hour stop after 2 hours run / *Occasional use : maximum one hour a day * 4 bar (60 psi) pressure limit is applicable when using a reinforced hose. The pressure limit when using tubing is 2 bar (30 psi) * Hose barb * F = Fixed speed * VM = Mechanical speed variator Albin Pump ALP Technical Datasheet  Albinpump.com  [email protected]

Open the catalog to page 3

Pump speed (rpm) Vitesse pompe (tr/min) Débit (l/h) Flow: lph (gph) Intermittente* Intermittent* Occasionnelle* Occasional* *Intermittent use : minimum one hour stop after 2 hours run / *Occasional use : maximum one hour a day * 4 bar (60 psi) pressure limit is applicable when using a reinforced hose. The pressure limit when using tubing is 2 bar (30 psi) 4 [email protected] Albinpump.com Albin Pump ALP Technical Datasheet * Hose barb * F = Fixed speed * VM = Mechanical speed vari

Open the catalog to page 4

0.37 (0.5) Intermittent* En Continuous 24/24h continu 24/24h Intermittente* Pump speed (Rpm) Vitesse pompe (tr/min) Flow: m3/h Débit (m3/h) (gpm) Occasional* Occasionnelle* *Intermittent use : minimum one hour stop after 2 hours run / *Occasional use : maximum one hour a day * 4 bar (60 psi) pressure limit is applicable when using a reinforced hose. The pressure limit when using tubing is 2 bar (30 psi) * Hose barb * F = Fixed speed * VM = Mechanical speed variator Albin Pump ALP Technical Datasheet  Albinpump.com  [email protected]

Open the catalog to page 5

1.1 (1.5) En Continuous 24/24h continu 24/24h Pump speed (Rpm) Vitesse pompe (tr/min) Flow: m3/h Débit (m3/h) (gpm) Intermittent* Intermittente* Occasional* Occasionnelle* *Intermittent use : minimum one hour stop after 2 hours run / *Occasional use : maximum one hour a day * 4 bar (60 psi) pressure limit is applicable when using a reinforced hose. The pressure limit when using tubing is 2 bar (30 psi) 6 [email protected] Albinpump.com Albin Pump ALP Technical Datasheet * Hose barb * F = Fixed speed * VM = Mechanical speed vari

Open the catalog to page 6

Pump speed (Rpm) Vitesse pompe (tr/min) Flow: m3/h Débit (m3/h) (gpm) *Intermittent use : minimum one hour stop after 2 hours run / *Occasional use : maximum one hour a day * 4 bar (60 psi) pressure limit is applicable when using a reinforced hose. The pressure limit when using tubing is 2 bar (30 psi) * Hose barb * F = Fixed speed * VM = Mechanical speed variator Albin Pump ALP Technical Datasheet  Albinpump.com  [email protected]

Open the catalog to page 7

About Ingersoll Rand Inc. Albin Pump is a brand of Ingersoll Rand and part of the Precision and Science Technologies (PST) business segment. PST consists of a portfolio of complementary, mission critical brands such as Milton Roy®, ARO®, LMI®, Albin Pump, Thomas®, Welch®, Haskel®, Dosatron®, YZ®, Williams®, MP® and Oberdorfer®. At PST, we deliver solutions for precision dosing and transfer of high value fluids in various markets such as medical, food and beverage, water and hydrogen. For more information, visit www.IRCO.com. We are committed to using environmentally conscious print practices...

Open the catalog to page 8

All Albin Pump catalogs and technical brochures

Archived catalogs

ALBIN PUMP MG Rubber Lobe Pump
4 Pages