2 channels sampled at 14-bit resolution 125 MS/s simultaneous real-time sampling rate on each input Up to 128 Million samples of on-board acquisition memory per channel Asynchronous DMA device driver AlazarDSO® Oscilloscope Software Software Development Kit supports C/C++, C#, Python, MATLAB®, LabVIEW® Support for Windows® & Linux® Operating System 32-bit/64-bit Windows & 64-bit Linux AlazarTech ATS®9146 is a dual-channel, 14-bit, 125 MS/s waveform digitizer card capable of storing up to 128 Million samples per channel of acquired data in its on-board memory or streaming acquired data to PC memory. ATS9146 is a single-lane PCI Express (PCIe x1) Gen 1 card, which supports up to 200 MB/s bus throughput. Users can capture data from one trigger or a burst of triggers. Users can also stream very large datasets continuously to motherboard memory or hard disk. ATS9146 PCI Express digitizers are an ideal solution for cost-sensitive OEM applications that require a digitizer to be embedded into the customer’s equipment. Applications Optical Coherence Tomography (OCT) Ultrasonic & Eddy Current NDT/NDE Radar/RF Signal Recording & Analysis Terabyte Storage Oscilloscope High-Resolution Oscilloscope Lidar Spectroscopy Multi-Channel Transient Recording ATS9146 is supplied with AlazarDSO oscilloscope software that lets the user get started immediately without having to write any software. Users who need to integrate the ATS9146 in their own program can purchase a software development kit, ATS‑SDK, for C/C++, C#, Python, MATLAB, and LabVIEW for both Windows and Linux operating system. All of this advanced functionality is packaged in a low power, half-length PCI Express card.

125 MS/s 14-Bit PCIe Digitizer PCI Express Bus Interface ATS9146 interfaces to the host computer using a 1-lane PCI Express bus, operating at 2.5 Gbps. According to PCIe specification, a 1-lane board can be plugged into any PCIe slot. ATS9146 requires at least one free slot on the motherboard. Electrically, ATS9146 is compatible with Gen 1, Gen 2, and Gen 3 slots. The physical and logical PCIe x1 interface is provided by an on-board FPGA, which also integrates acquisition control functions, memory management functions and acquisition datapath. This very high degree of integration maximizes product...

125 MS/s 14-Bit PCIe Digitizer NPT AutoDMA is designed specifically for these applications. By only storing post-trigger data, the memory bandwidth is optimized. Triggered Streaming AutoDMA Triggered Streaming AutoDMA is virtually the same as Continuous mode, except the data transfer across the bus is held off until a trigger event has been detected. START CAPTURE INPUT(S) CAPTURE NPT AutoDMA buffers do not include headers, so it is not possible to get trigger time-stamps. More importantly, a BUFFER_OVERFLOW flag is asserted if the on-board memory overflows, i.e. the amount of memory that has...

125 MS/s 14-Bit PCIe Digitizer J and K). This allows the user to combine the two engines using a logical OR operand. There are three types of External Clock supported by ATS9146. These are described below. The user can specify the number of records to capture in an acquisition, the length of each record and the amount of pre-trigger data. Fast External Clock A new sample is taken by the on-board ADCs for each rising (or falling) edge of this External Clock signal. A programmable trigger delay can also be set by the user. This is very useful for capturing the signal of interest in a pulse-echo...

125 MS/s 14-Bit PCIe Digitizer RoHS Compliance ATS9146 units are fully RoHS compliant, as defined by Directive 2015/863/EU (RoHS 3) of the European Parliament and of the Council of 31 March 2015 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. All manufacturing is done using RoHS-compliant components and lead-free soldering. On-Board Monitoring Adding to the reliability offered by ATS9146 are the on-board diagnostic circuits that constantly monitor over 15 different voltages, currents and temperatures. LED alarms are activated if any of the...

125 MS/s 14-Bit PCIe Digitizer Linux Support AlazarTech offers Dynamic Kernel Module Support (DKMS) drivers for the following Linux distributions: Ubuntu, Debian, and RHEL®. AlazarTech DKMS drivers may work for other Linux distributions but they have not been tested and technical support may be limited. Users can download the DKMS driver for their specific distribution by choosing from the available drivers here: ftp://[email protected]/outgoing/linux Only 64-bit Linux operating systems are supported. A GUI application called AlazarFrontPanel that allows simple data acquisition and display...

125 MS/s 14-Bit PCIe Digitizer System Requirements Personal computer with at least one free PCIe slot, 16 GB RAM, 100 MB of free hard disk space, SVGA display adaptor and monitor with at least a 1024 x 768 resolution. Power Requirements On-Board Acquisition Memory System On-board acq. memory Up to 128 Million samples per channel Record length Software-selectable with 32-point resolution, specified in number of sample points. Must be a minimum of 128 points and must be a multiple of 32. Software-selectable from a minimum of 1 to a maximum of infinite number of records Pre-trigger depth Acquisition...

125 MS/s 14-Bit PCIe Digitizer Triggering System Materials Supplied Edge triggering with hysteresis Comparator type Analog comparators ATS9146 Installation Disk (on USB Flash Drive) Number of trigger engines 2 Trigger engine combination Engine J, engine K, J OR K, software-selectable Trigger engine source CH A, CH B, EXT, Software or None, independently softwareselectable for each of the two Trigger Engines ±5% of full scale input, typical Trigger sensitivity ±10% of full scale input range. This implies that the trigger system may not trigger reliably if the input has an amplitude less than ±10%...

125 MS/s 14-Bit PCIe Digitizer DATASHEET REVISION HISTORY Changes from version 1.3 (Nov 2021) to version 1.3A Section, Page Changes to maintenance subscription inclusions: removed technical support Software Development Kits, pg. 5 Added new section to specify how AlazarTech handles technical support: Customers receive free technical support on hardware products that are under warranty. Out-of-warranty support requires the purchase of support hours. Updated Electromagnetic Emissions standard number (revised report) Updated specification name from Input protection to Absolute maximum input Actual...