Sectional doors
7Pages

Solutions for loading and unloading Sectional doors

Sectional doors Sectional doors Sectional doors are a perfect solution for air-conditioned business premises thanks to the energy saving that their insulating capacity ensures. They open vertically upwards, moving the panels below the roof horizontally. Thanks to this it will always be possible to install them regardless of the space available. They constitute the most practical and safe solution for loading and unloading tasks, since they avoid possible falls and occupy the minimum space. The way they adapt to the roof will allow a high level of functionality and space optimisation....

Sectional doors Technical description Panels Panels for industrial doors with a double wall of galvanised steel sheeting, separated by polyurethane foam insulation. An insulating core of rigid polyurethane not containing CFCs with an average density of 40 kg/m3. EPDM seal that provides impermeability and air-tightness between the panel joints for industrial doors. Finished on the inside face in polyester paint. Finished on the outside face with: –Thermo-hardened polyester paint of 25 micras. –Semi-rigid polyolefin / vinyl chloride film of 140 micras, decorated using a rotogravure printing...

Sectional doors Composed by: Elevation types • Weight compensation through an assembly of torsion springs. • Safety device against spring breakage. • Cable drums and side loading cables. • Safety device against cable breakage. • Springs are powder-coated and painted in blue for a better response to fatigue and improved rustproofing. Guide type • Of galvanised steel with a reinforced side bracket with a side trim support. Door panel • Double-faced panels of galvanised steel with intermediate thermal and acoustic insulation of polyurethane foam 40 mm thick. Standard heights of 500 and 610 mm....

Sectional doors Dimensions: Assembly measurements: AN: Measured width of the door space. Ordered width. AL: Measured height of the door space. Ordered height. DI: Space above the door space. EL: Minimum sideroom. 100 mm in assemblies between walls. 80 mm in assemblies behind a cavity. In the place where the shaft sits, more space is needed. EL: Espacio lateral (para las guías.) El hueco mínimo necesario para la instalación es de 80 mm (K). En caso de montaje entre muros se recomienda un ancho mínimo de 100 mm (L). PR: Depth of door housing. Installation: Each component in the door is...

Sectional doors Rear bar: To fix the horizontal guides, ensuring the solidity of the system and providing for the squaring of the guides. (Figure 10, E). Reinforced side bracket: A sturdier piece for better grip and placement of the side trim as well as space to screw into the wall without touching the panel. (Figure 11) Self-centring of hinges Pre-drilling of hinges for fast, easy adjustment (Figure 12). Fast assembly and noiseless operation.

Sectional doors Highway CV-550 Alberic-Alzira km 6.5 46600 Alzira, Valencia, Spain +34 962 41 32 31 alapontlogistics.com web@alapont.net