BSC20100 SERIES WIRELESS ACCESS POINTS
4Pages

BSC20100 SERIES WIRELESS ACCESS POINTS BSC20100 series Wireless Access Points are reliable 802.11b/g WLAN with 2 ports LAN Access Points. They can be configured to operate in one of AP/Bridge/Repeater modes. Users are able to configure BSC20100 series Wireless Access Points by WEB interface via LAN port or WLAN interface. BSC20100 series Wireless Access Points provide dual Ethernet ports in switch mode so that users can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, BSC20102POE Wireless Access Point also provides PD feature on ETH2 which is fully compliant with IEEE802.3af P.O.E. specification. Therefore, BSC20100 series Wireless Access Points are the best communication solution for wireless applications. HIGH SPEED AND HIGH SECURITY CAPABILITY With IEEE802.11b/g dual mode capability, BSC20100 series Wireless Access Points are able to operate with a maximum link speed of 54Mbps to maximize the capacity of communication channel. The security standards include WEP, WPA, WPA-PSK(TKIP,AES), WPA2, WPA2PSK(TKIP,AES), 802.1X and Radius. These various kinds of security standards for WLAN are also configurable to ensure the security of data transmission. REDUNDANT POWER INPUT BSC20100 series Wireless Access Points offer different power inputs to enhance its reliability. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation.

TECHNICAL SPECIFICATIONS Operating Modes Protocols Frequency Bands Transmission Rates Modulation Transmit Power Receiver Sensitivity Data Security Wireless Security Technology AP/Bridge/Repeater ICMP, IP, TCP, UDP, DHCP, BootP, ARP /RARP, DNS, SNMP MIB II, HTTPS, SNMP V1/V2, Trap, Private MIB America FCC: 2.412~2.462 GHz (11 channels) Europe CE/ETSI: 2.412~2.472 Ghz (13 channels) IEEE802.11b: 1/ 2/ 5.5/ 11 Mbps IEEE802.11g: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps IEEE802.11b: CCK, DQPSK, DBPSK IEEE802.11g: OFDM with BPSK, QPSK, 16QAM, 64QAM IEEE802.11b/g: 18dBm -81dBm @ 11Mbps, PER< 8%; -64dBm @...

Alarm Indication DHCP ETH WLAN WLAN Signal Power Fault Present at ETH2 of BSC20102POE type Power Device (IEEE 802.3af): IEEE 802.3af compliant input interface Power consumption: 8 Watts max. Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 10^8 ohms min Software Features Associated wireless clients (AP mode) Current DHCP mappings System event log (local log, remote syslog, SNMP trap) Wireless link status monitor (AP Client mode) Link down/Power down alarm by Relay Output SNMP Trap System Log DHCP Client/Server Web HTTPS console Authentication by...

Power Input Reverse Polarity Protection Power Consumption Operating Temperature Storage Temperature Operating Humidity Dimensions Casing Shock Free Fall Vibration EMI EMS MBTF Power Requirements Dual DC Power Input: 12~48VDC in 6-pin Terminal Block Present 6 Watt Max. Environmental Features -40 - 70 ºC (-40 - 158 ºF) -40 - 85 ºC (-40 - 185 ºF) 5% - 95% Non-condensing Mechanical Features 52 mm(W)x 106 mm(D)x 144 mm(H) IP-30 protection Standards IEC60068-2-27 IEC60068-2-32 IEC60068-2-6 FCC Part 15, CISPR (EN55022) class A EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5...