524 Haul Unit
1 / 2 PagesView full catalog
524 Haul Unit
Product catalog summary
Specifications
- Dimensions: Width: 31 in. (787 mm), Length: Standard 128.5 in. (3,264 mm), Extended 158.75 in. (4,032 mm)
- Weight: 950 lbs. (431 kg) with battery pack
- Wheel Base: 93.2 in. (2,367 mm)
- Drive Wheels: Two, 5.5” Diameter
- Electrical Horsepower: 5 HP (3.7 kW)
- Battery Pack: Weight: 250 lbs. (113 kg), Voltage: 24 VDC
- Propel: Forward, Reverse
- Drive Type: Electric Driven
- Brake: Electric spring applied, electric release with static torque of 10.5 lb. ft. (14 N·m), Caliper Disc hand brake
- Speed: 500 feet per minute (152 m/min), 0-4 mph (0-6.4 Km/h)
- Gear Box Oil Capacity: 5 qt. (4.7 L)
- Gross Vehicle Weight: 8,200 lbs. (3,719 kg)
- Operating Grade (Maximum): Unloaded 5%, Loaded 2.5%
- Volumetric Capacity (Max.): 2 cu yd (1.5 cu m)
- Pipe Size (Minimum): 36” (914 mm) ID
- Track: Track Gage: 11.13 in. (283 mm), Base: 14.13 in. (359 mm), Height: 3.75 in. (95 mm), Length: 8 ft (2.4 m)
Features
- The 524 Haul Unit transports spoils from the Tunnel Boring Machine back to the launch shaft.
- Equipped with a hydraulic hand brake and an electric release brake on the controller.
- Removable battery pack allows for a spare, fully charged battery to minimize downtime.
- Two frame options for 60” (standard frame) or 90” (extended frame) dirt bucket sizes.
- Convenient charging plug for recharging the battery while the battery pack is in the haul unit.
- Integral electric motor gear box assembly.
- Pendant type controller with propulsion controls and an electric release brake switch.
Additional Information
- Part No. F10325F00 (Standard), F16900F00 (Extended)
- On-Board Charging Plug
- Integral 24 Volt Electric Motor Gear Box Assembly
- Hydraulic Hand Brake
- Akkerman Inc. reserves the right to improve its product without notice or obligation.
See more
Catalog excerpts
Integral 24 Volt Electric Motor Gear Box Assembly Hydraulic Hand Brake Pendant type controller with propulsion controls and an electric release brake switch. Removable Battery Pack On-Board Charging Plug Brake Assembly Akkerman Inc. reserves the right to improve its product without notice or obligation. 524HaulUnit, F10325F
Open the catalog to page 2All Akkerman catalogs and technical brochures
GBM 48 Series Jacking Frame4 Pages
P100 Power Pack2 Pages
P150 Power Pack2 Pages
P250D Power Pack2 Pages
P275 Power Pack2 Pages
GBM Guidance System2 Pages
Notched Thrust Casings2 Pages
TBM Series II2 Pages
5000 Series Pump Unit2 Pages
EH2550 Bentonite Pump2 Pages
5000 Series II Pump Unit2 Pages
P400/P600 Power Pack2 Pages
EH2250 Bentonite Pump2 Pages
Akkerman Product Guide15 Pages
1548 Haul Unit2 Pages
TBM2 Pages
Control Container2 Pages
Eliminator2 Pages
PCH 36-44"2 Pages
PCH 20-28.5"2 Pages
PRH Kit2 Pages
Jetting and Lubrication Pump2 Pages
P275T Power Pack2 Pages
P150Q Power Pack2 Pages
P100Q Power Pack2 Pages
4812A Jacking Frame2 Pages
308A/339A Jacking Frame2 Pages
240A Jacking Frame2 Pages
Akkerman Product Guide15 Pages
Tunnel Boring Machine (TBM)1 Page
Microtunneling1 Page
Guided Boring Machines (GBM)52 Pages
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.