AKIM_SERVO_2SC_EN
AKIM_SERVO_2SC_EN
- Reduction Ratios: Single-stage ratios range from 14:1 to 87:1, all integer and mathematically precise.
- Drive Speeds: Permissible up to 4,500 min-1.
- Backlash: Adjustable to less than 1 minute, can be set to "backlash-free".
- Efficiency: Achieves over 90% efficiency.
- Torque: Maximum starting torque varies by model, from 50 Nm to 750 Nm.
- Mass Moment of Inertia: Ranges from 0.12 kgcm2 to 3.7 kgcm2.
- Weight: Varies from 3 kg to 30 kg depending on the model.
- High torsional rigidity and compact design.
- High concentricity and quiet operation even at high speeds.
- Lifetime lubrication and maintenance-free operation.
- Excellent weight/performance ratio.
- Low noise operation due to precise bearings and components.
- High overload safety and torsional rigidity.
- Designed for applications requiring maximum acceleration, deceleration, and position accuracy.
- Detailed dimensions for input and output shafts are provided for each model.
- Radial and axial load capacities are specified for different drive speeds.
Catalog excerpts
AKIM gear technology – Swiss Made.
Open the catalog to page 1
AKIM gear technology – Swiss Made. Servo reducers 2SC-212/2 - 2SC-222/2 A high dynamic and very precise cycloid gear that can be combined with almost all AC and DC servomotors. The motor- gear shaft connection is done with a torsionally rigid and flexible clamp coupling. The ratios of 14 : 1 to 87 : 1 achievable in single -1 stage, are all integer and mathematic precise. In the servo mode, drive speeds of up to 4’500 min are permissible. General informations. Minimum backlash < 1 min can be adjusted to “backlash-free” Minimum mass moment of inertia through ingenious construction Maximum position...
Open the catalog to page 2
AKIM gear technology – Swiss Made. Output nominal torque T2n [Nm] at drive speed n1. Type * Max. 20% of permissible power on time *Tightening torque of the screw T3 Dimensions. Type Dimensions Input
Open the catalog to page 3
AKIM gear technology – Swiss Made. Radial / Axial load output shaft. Type Drive speed N2 Max. permissible radial load F r2 [N] related to the centre of the output shaft Max. permissible axial load F a2 [N] related to max. permissible radial load F r2 AKIM AG | Breitenstrasse 16 | CH-8852 Altendorf | Tel. +41 55 451 85 00 | Fax 41 55 451 85 09 [email protected] | www.akim.ch
Open the catalog to page 4
AKIM gear technology – Swiss Made. Motor flange dimensions. Dimensions AKIM AG | Breitenstrasse 16 | CH-8852 Altendorf | Tel. +41 55 451 85 00 | Fax 41 55 451 85 09 [email protected] | www.akim.ch
Open the catalog to page 5All AKIM AG catalogs and technical brochures
AKIM_Overview_EN2 Pages
a_Questionaire_EN1 Page
AKIM_Installation_Kit_EBS_EN5 Pages
AKIM_Part_Turn_EN4 Pages
AKIM_Cycloidal_2S_EN5 Pages
AKIM_Centrifuge_EN2 Pages
AKIM_2S_R90_EN7 Pages
AKIM_ACBAR_EN9 Pages
- Planetary gearbox
- Coaxial gearhead
- Precision gearhead
- Compact gearhead
- Solid-shaft gearhead
- Hollow-shaft gearhead
- Gearbox for industrial applications
- Transmission gearhead
- Multi-stage gearhead
- Single-stage gearhead
- Shaft gearhead
- Machines gearbox
- Low-backlash gearhead
- High-efficiency gearhead
- High-precision gearhead
- Robot gearbox
- Medical device gearbox
- Three-stage gearhead
- Flange-mounted gearhead
- Machinery gear reducer