CPC-Coolers

Product catalog summary

Overview: AKG has developed a new standard series of air-cooled combicoolers for oil-injected screw compressors, suitable for power ratings up to 37 kW. These coolers incorporate advanced technical features to enhance performance and durability.

Special Features and Benefits:

High-performance hollow core profiles that reduce thermal tension.
Special endplates designed for thermal stress relief.
Separate air passages between oil and air sides to optimize cooling efficiency.
Optimized fin and turbulator combinations for improved heat dissipation.
Four models available, providing power ratings from 4 kW to 37 kW.
Standard models are readily available from stock, ensuring short delivery times.
Designed for extended lifetime under heavy-duty conditions and frequent load/unload cycles.

Technical Specifications:

Maximum oil and air temperature: 100°C.
Maximum ambient temperature: 45°C.
Working pressure: 14 bar.
Weight ranges from 8 kg to 19.7 kg depending on the model.
Oil and air coupling sizes vary by model.

Performance Data:

Performance curves indicate the relationship between cooling air mass flow and total power (air + oil) for each model (CPC 1 to CPC 4).
Data is valid for specified temperatures and mass flows.

Contact Information: AKG Thermotechnik International GmbH & Co. KG, Am Hohlen Weg 31, 34369 Hofgeismar, Germany. Telephone: ++49 (0) 5671 883-0, Fax: ++49 (0) 5671 3582, Website: www.akg-group.com, Email: [email protected].

Catalog excerpts

CPC - Compressor Cooler Series Aircooled combicoolers for oil-injected screw compressors AKG created a new economical standard cooler series for screw compressors up to 37 kW. Developed from series production of well-known OEM´s this range is loaded with technical novelties. Our latest evolutionary improvements were incorporated to supply highest quality features for a standard range.

Open the catalog to page 1

Special Features and Benefits - high performance hollow core profiles reduce thermal tension special endplates for thermal stress relief separating air passage between oil and air side optimized fin / turbulator combination 4 combi-coolers provide power ratings from 4 kW to 37 kW standard models are readily available from stock, short delivery times CPC coolers are designed for extended lifetime even under heavy duty conditions and frequent load / unload cycles. Cooler with flexible profile Cooler with standard profile Mises stresses in critical areas 150 braze sheet braze sheet internalfins...

Open the catalog to page 2

Technical Data

Open the catalog to page 3

Performance Curves valid for oil / air inlet temperature: 100°C, cooling air temperature: 45°C cooling air mass flow [kg/h] Performance data valid for specified temperatures and mass flows. Detailed specifications for individual applications available on request. Please return completed requirement list to AKG. Please mind our set up and operating instructions. AKG Thermotechnik International GmbH & Co. KG Am Hohlen Weg 31; 34369 Hofgeismar; Germany; Telephone: ++49 (0) 5671 883-0; Telefax: ++49 (0) 5671 3582; Website: www.akg-group.com; e-Mail: [email protected]

Open the catalog to page 4

All AKG catalogs and technical brochures