CDS1215X-MEC (MECHANICAL DEVICE) – MEASUREMENT RANGE UP TO 15 000 MM STAINLESS STEEL VERSION Specifications: Measurement range Circumference drum Sensing device Material 0 up to 15 000 mm 300 mm/turn Adaptable with all of our incremental or absolute encoders Body and cover – Stainless steel grade 303 (1.4305) Measuring cable - Stainless steel 0,90 mm +/- 0,05% f.s. +/- 0,01% f.s. (optional) 10 m/s 4 m/s² (before cable deformation) ≈ 13kg -20° to +80°C -30° to +80°C Cable diameter Standard linearity Max. Velocity Max. Acceleration Weight Operating temperature Storage temperature Cable forces : Measurement range in mm 15 000 Ordering reference: Or any other range between 0 and 15 000mm = Adapter flange for Ø58 encoder with Ø6 shaft (06A for the provision of a Ø6 coupling device without flange) = Adapter flange for Ø58 with Ø10 shaft = Adapter flange for Ø90 encoder with Ø12 shaft (12A for the provision of a Ø12 coupling device without flange) = Fixing of the measuring cable with a clevis = Measuring cable in stainless steel non coated = Fixing of the measuring cable with a M6 threaded rod = Water evacuation holes If no option is specified for the adapter flange, the draw-wire sensor will be supplied as standard with a Ø 10 coupling brace without flange. For the adaptation of an encoder or other sensor device which does not belong to our range, please contact us. N ous nous réservons le droit de modifier à tout moment les caractéristiques de nos modèles – Photos et dessins non co

Fixing of the measurement cable with a lug: Fixing of the measuring cable with a M6 threaded rod: The mounting of the lug on bearing balls allows a free rotation relative to the measuring cable. The threaded rod is fixed using 2 nuts (supplied). The thickness of the fixing plate should not be more than 8mm. The mounting of the rod on bearing balls allows a free rotation relative to the measuring cable. Cable attachment with a clevis : Cleaning brush for the cable The clevis is fixed using a pin (supplied). The attachment mounted on ball bearings allows a free rotation relative to the measurement...

Adaptation for an Ø58 encoder, and Ø6 shaft diameter OP-06: Adaptation flange + Ø6 Oldham coupling OP-06A: Ø6 Oldham coupling without adaptation flange Adaptation for an Ø58 encoder, and Ø10 shaft diameter OP-10: Adaptation flange + Ø10 Oldham coupling Without specification, a MEC series draw-wire sensor will always be delivered with an Oldham coupling Ø10 without adaptation flange. Adaptation for an Ø90 encoder, and Ø12 shaft diameter OP-12: Adaptation flange + Ø12 Oldham coupling OP-12A: Ø12 Oldham coupling without adaptation flange N ous nous réservons le droit de modifier à tout moment les...

Dimensional drawing N ous nous réservons le droit de modifier à tout moment les caractéristiques de nos modèles – Photos et dessins non contractuels – Version 2.0 Fabriqué en