HydroFlex Airtec® A/S • Hvedemarken 21 • DK-7620 www.airtecsolutions. High-pressure Increase DryCool Control - simple logic With DigiSens you obtain optimal cooling effect without cold drop and wet animals. For total control the display is divided into zones, this ensures simple and logical running of the system. The controls are optimised for efficiency and complete unique to the market. • Variable run and pause time By adjusting the run and pause time of the nozzles you ensure maximum cooling without cold drop and wet animals • Temperature and humidity control A humidity and temperature sensor ensures that the overall operation of the system will work when the temperature and humidity relations dictate the need • Hygienic rinse Automatic rinse of the water minimizes the possibility for bacterial growth • High and low humidity alarm Ensures against valve and sensor failure SlipLock - Simple, safe and fast These are keywords when installing high-pressure nozzles using the SlipLock system. With SlipLock fittings and PE12 high-pressure hose you will obtain a perfect result every time. SlipLock has been developed for use in aggressive environments working at high-pressure, and for added corrosion resistance all fittings are nickel plated. All components in the SlipLock are pressure tested in relation to the Airtec® A/S quality standard ISO 9001. This means that all components has been going through a test at 3 times the normal working pressure. • No need for special tools • SlipLock fittings • PE 12 high-pressure hose • Nozzles with ceramic inset and non return valve • Corrosion resistant material HydroFlex - High-pressure cooling system At 50 bar pressure the high-pressure nozzles create a fine mist of water in the air. By evaporating 1 litre of water this will consume approximately 700 Watt of heat energy thereby obtaining a heat reduction. The fine mist from the nozzles will ensure a fast and effective evaporation of the water. • Frequency inverted pump Fully automatic speed adjustment of the pump ensures the correct output pressure and lowest possible energy consumption without by-pass Choose from 0-300, 0-700 or 0-1400 l/h • Anti drip The run and drain valve system allows build up and release of pressure in the system easy and effectively and prevents dripping from the nozzles • Safety features Flow guard • Flow guard is a built in safety feature that monitors the actual water consumption in order to protect against leaks Water pressure alarm • A built in safety feature that protects the pump from damaged in the event of water pressure failure to the system Pump monitoring • This built in safety feature monitors the pump temperature to protect against overheating Water filter system • This filters particles larger than 1 @.at 60 % filtration then again at 90 %

HydroFlex - high-pressure cooling for the pigsty ISO 9001 Quality – ISO 14001 Environment – ISO 22000 HACCP Hygiene Feed intake During the hot days the animal responds by reducing the feed intake. This is a way to regulate the body temperature. During longer periods of hot weather this can effect the growth of the livestock. Aggressive behaviour Due to the effect of the cooling system the behaviour of the pigs both in terms of aggression and lying behaviour is improved greatly. The aggressions are remarkably milder in terms of the character of the aggression. The animals lying behaviour is affected...