*mydirectindustry

Series RE-19

Product catalog summary

Overview: The document provides technical specifications and configurations for the Series RE-19 valve terminals, which are manifold systems with integrated electrical connections, LED indicators, manual override, and built-in circuit protection. The valves require specific configurations and additional components for full functionality.

Specifications:

Temperature Range: -10°C to +50°C
Medium: Filtered, oil-free, and dried compressed air according to ISO 8573-1:2010, Class 7:2:4
Materials: Anodized aluminum body, NBR seals
Protection: IP 65 according to EN 60529

Order Code and Configuration:

Valves with connection G 1/4 require two stations on the manifold.
Order code covers only the manifold; multi-pin plug with cable must be ordered separately.
Valve configuration starts with high numbers at the multi-pin side, ending with low numbers on the opposite side, followed by blind plates if ordered.

Electrical Options:

Multi-pin, AS-Interface, and Profibus-DP options available.
Voltage: 24 V DC ± 10%
Profibus-DP: Baud rate selectable between 9600 Bit/s and 12 Mbit/s
AS-Interface: Bus-Voltage 18.5 ... 31.6 V DC

Dimensions and Weight:

Various models with different dimensions and weights, ranging from 0.82 kg to 4.23 kg without valves.

Valve Details:

Electrically operated spool valves with manual override options (detent or non-detent).
Outlets: G1/8, G1/4
Operating Pressure: 2.5 to 8 bar
Flow Rate: Up to 2100 Nl/min
Response Time: Varies by model, e.g., on: 11 ms, off: 20 ms at 6 bar

Accessories:

Pressure dividing plug, blind plate, and 25-pin multi plug available.

Catalog excerpts

Technical details Temperature range Manifold system with integrated electrical connection including LED indicators, manual override and built-in circuit protection. Valves with connection G 1/4 require 2 stations on the manifold. The above order code covers only the manifold. The multi-pin plug with cable must be ordered separately. The valve terminal is delivered pre-assembled and function-tested. If not specified with the order, valve configuration is as follows: Valves are mounted according to their order number, starting with high numbers at the side of the multi-pin, ending with low numbers on the opposite side, followed by blind plates (if ordered). Order code More detailed information about the installation you find in the manual at www.airtec.de.

Open the catalog to page 1

Multi-pin, Profibus-DP AS-Interface 1 = pressure inlet Model-no.: RE-19/04-AS3 RE-19/08-AS3 RE-19/12-AS3 C D Weight without valves (kg)

Open the catalog to page 2

Valve terminals > Series RE-19 Electrical options Multi-pin The 25-pin multi plug (see page 7-07) has to be ordered separately. Pressure dividing plug

Open the catalog to page 3