"UNPARALLELED PERFORMANCE AND SAFETY UNDER PRESSURE!"® DESCRIPTION The TestMaster® Model LPHE Series Hydrostatic Test Tools are specially designed to grip and provide positive sealing for plain end-tubing. The safety pre-grip of the clamping mechanisms assure a constant, positive grip during any work or operation cycle. Tools are available with manual lever operation or pneumatic actuation. The tool can be used with a variety of services including helium, water, oil, Skydrol, and other gases and liquids. This precision-machined tool provides versatility for use in pressure testing applications. The compact, balanced design is particularly suited to space restricted work areas, such as aircraft hydraulic and fuel lines, or residential and commercial heating and cooling systems. TestMaster® Model LPHE Series Hydrostatic Test Tools ■ Pressures up to 5,000 psi (345 bar) ■ 0.13 in. to 3.00 in. OD (3.2 mm to 76.2 mm OD) ■ Collet grip and seal on tube OD ■ Manual lever operated model ■ Single air-operated model ■ Pressure-compensated grip APPLICATION The TestMaster® Model LPHE Series Hydrostatic Test Tool is a snap-on tool suitable for hydrostatic pressure testing, air underwater testing, and cleaning applications with working pressures up to 5,000 psi (345 bar). This tool conforms to military, nuclear, automotive, and aerospace testing specifications such as API, ASTM, ASME, ISO, DIN, and BS. MATERIALS Wetted Parts: Heat-treated, stainless steel TOOL CONFIGURATION Collet Grip and Seal: On tube OD Gripping: Pressure-compensated The Model LPHE Series Tool comes in standard and metric tube, pipe, and fitting sizes from 0.13 in. to 3.00 in. (3.2 mm to 76.2 mm) in diameter. Special tube sizes and tool configurations will be considered upon request. OPERATION Connect the Model LPHE to the pressure line. Retract collets (by spring or handle squeeze). Push tube end into tool until pressed against the tube stop. This instantly provides a complete seal. Engage collets (by handle release or air). Once collets are engaged, tool is ready for safe operation. Next, apply test pressure to desired level, but do not exceed maximum operating pressure. After pressure cycle is complete, retract collets as before and pull tool to remove from tube. Lever Operated: Normally-closed spring clamp and manual lever grip release Single Air-Operated: Normally-open spring release and air-piloted clamp Air Requirement: 80 - 100 psi (5.5 - 6.9 bar) OPERATING CONDITIONS Maximum Pressure: 5,000 psi (345 bar) Temperature: 32° F to 120° F (0° C to 49° C) Services: Helium, water, oil, Skydrol, and other gases and liquids Tube OD Range: 0.13 in. to 3.00 in. (3.2 mm to 76.2 mm) OD Tolerance: Standard tube tolerances

MAXIMUM PRESSURE Model LPHE Series Hydrostatic Test Tools Model LPHE Series Tool Specifications Body Size * Note: Tools are designed for a dedicated tube diameter and do not cover the entire range of tube diameters noted for each body size. A single tube OD must be specified for the collet set. Special Configurations Available Upon Request Automatic Air-Bleed Valve Recommended for Optimal Performance BENEFITS Decreases cycle time Ensures proper tube depth engagement Prevents tube end collapse and eliminates scrap Accommodates shorter length tube or pipe Increases production throughput Contains...