Atomization spray gun with extension and orientable head PF110-GXCxx (500) detail orientable head HEAD ANGLE VARIABLE TYPE Ideal version for manual and efficient treatment of: mold surfaces - internal surfaces - hard to reach surfaces Basic features: - stem obturator at the tip close to atomization head - the head angle can be adjusted 360° by simply loosering the base nut. Besides in head angle variable type, the head angle can be adjusted from 90° to - 90° by loosening the top bolt. - the dual pipe system employing separate pipes for the air and fluid enhances compactness and durability. - as the air circuit for spraying is not same as the one for spraying pattern , you can adjust the spraying pattern by hand - direct adjustment on gun body of n.3 atomization parameters: flow control - primary atomization - spraying pattern Engineered Construction Products Via dei Chiosi, 18 - 20873 - Cavenago di B.za (MB) - tel. +39 039 2142293 e.mail: [email protected] - [email protected] - web: www.airmation.it

Head angle variable type extension spray gun Paint feed ssytem Nozzle bore Spraying pressure Paint spraying volume Maximum effec ve pa ern width Required compressor output Head angle and inner dia. into which head can be inserted Pipe length Weight Standard supply Engineered Construction Products Via dei Chiosi, 18 - 20873 - Cavenago di B.za (MB) - tel. +39 039 2142293 e.mail: [email protected] - [email protected] - web: www.airmati