Minimize Y our Drag The P19 and B619 models have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206 m (700’). These nearly flush units minimize drag as only 5 mm (2/10”) of the housing extends outside of the hull. The plastic P19 and bronze B619 provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. Proper Installation with Tilt Compensation Improper Installation without Tilt Compensation Tilted Element™ Thru-Hull • Cruising powerboats and sailboats • Sailboats Features • Depth only or Depth and temperature • Fixed 20° tilted versions for 16° to 24° hull deadrise • Fixed 12° tilted versions for 8° to 15° hull deadrise • Fixed 0° tilted versions for 0° to 7° hull deadrise • Right angle cable exit offers low headroom and protection when transducer is stepped on • Included rubber washer allows tightening of the hull nut to irregular hull surfaces • Housings are ABYC H-27 compliant • Optional temperature sensor • Plastic or bronze housings available In a proper installation the ceramic element is tilted inside the housing, which compensates for your boats deadrise. This aims the beam straight toward the bottom, resulting in stronger echo returns and more accurate depth readings.

The high-performance ceramic elements are tilted inside the housing, which compensates for your boats deadrise. This aims the beam straight toward the bottom, resulting in stronger echo returns and more accurate depth readings. Technical Information DIMENSIONS 200 kHz-U Number of Elements and Configuration 11° 510 Ω MAXIMUM DEPTH RANGE 200 kHz Up to 206 m B619 Bronze BEAM DIAMETER VS DEPTH Depth 15 m (50’) Acoustic Window: Urethane Hole Diameter: 51 mm (2”) ©Airmar Technology Corporation As Airmar constantly improves its products, all specifications are subject to change without notice. All Airmar...