ATK200
1Pages

Catalog excerpts

Ultrasonic Air Transducer Technical Data Sheet Airmar ultrasonic transducers deliver the highest level of performance in the most challenging environments and they are the key component for our customers success and their applications. Our precision tuned air-ranging transducers are tried and true performers, even when used for difficult tasks. American-made from the highest quality materials, Airmar’s ultrasonic transducers provide reliable, long-lasting excellence to any measurement system. AIRDUCER® Ultrasonic Transducer Applications • evel measurement in chemically aggressive nvironments L e • Automation control • Food and beverage processing • Proximity sensing • Obstacle avoidance • Flow monitoring Best Operating Frequency: 200 kHz, ±4% Minimum Transmit Sensitivity at Best Transmit Frequency: 102 dB re 1µPa/V at 1 m Minimum Receive Sensitivity at Best Receive Freq.: -180 dB re 1V/µPa Minimum Parallel Resistance: 300 Ω, ±30% Minimum and Maximum Sensing Range*: 10 cm to 3 m Typical Sensing Range: 12 cm to 2 m Free (1 kHz) Capacitance: 500 pF, ±20% pF Beamwidth (@ -3 dB Full Angle): 10°, ±2° Maximum Driving Voltage (2% Duty Cycle Tone Burst): 500 Vpp Operating Temperature: -40°C to 60°C Weight: 6 g Housing Material: Kynar® 720 Acoustic Window: Kynar® 720 Features • ugged one-piece PVDF housing is U.S. FDA compliant R • Cylindrical design allows for installation in various Options • Available in alternate housing (AT200) *Pulse-Echo Mode: Minimum and maximum ranges are best case scenarios. Actual range may vary, depending on drive circuitry and signal processing. Note: Optimally, performance measurements should be taken when the t ransducer reaches a steady state. Impedance Magnitude & Phase Transmit & Receive Voltage Response Additional Resources Theory of Operations Applying Ultrasonic Technology Airmar’s T1 Developer’s Transceiver Module can be used for evaluation of AIRDUCER® Transducers. ©Airmar Technology Corporation ATK200_rS 4/11/24 As Airmar constantly improves its products, all specifications are subject to change without notice. All specifications typical at 22°C. Factory Mutual approved models suitable for: Class I, Division 1, Hazardous Locations. AIRDUCER® is a registered trademark of Airmar Technology Corporation. AMPHENOL is a registered trademark of Amphenol Corporation. Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated

Open the catalog to page 1