ARK41
1Pages

Catalog excerpts

Ultrasonic Air Transducer Technical Data Sheet 41 kHz AIRDUCER® Ultrasonic Transducer Applications • Level measurement in chemically aggressive environments • Food and beverage processing • Flow monitoring • Rugged one-piece PVDF housing is U.S. FDA compliant • Housing design will accommodate transceiver and signal processing electronics Best Operating Frequency: 41 kHz, ±4% Minimum Transmit Sensitivity at Best Transmit Frequency: 108 dB re 1μPa/V at 1 m Minimum Receive Sensitivity at Best Receive Frequency: -175 dB re 1V/μPa Minimum Parallel Resistance: 200 Ω, ±30% Minimum and Maximum Sensing Range*: 30 cm to 20 m Typical Sensing Range: 35 cm to 15 m Free (1 kHz) Capacitance: 5,000 pF, ±20% pF Beamwidth (@ -3 dB Full Angle): 14°, ±2° Maximum Driving Voltage (2% Duty Cycle Tone Burst): 1,800 Vpp Operating Temperature: -40°C to 90°C Weight: 560 g Housing Material: Kynar® 720 Acoustic Window: Kynar® 720 • Standard internal shielding Options • Cable length can be customized • 10 KΩ thermistor available for temperature compensation • Mounting caps available in BSP, NPT, or M32 threads • Available in alternate housing material (AR41) *Pulse-Echo Mode: Minimum and maximum ranges are best case scenarios. Actual range may vary, depending on drive circuitry and signal processing. Note: Optimally, performance measurements should be taken when the t ransducer reaches a steady state. ransducer reaches a steady state. t Directivity Pattern May be shown with optional equipment. Transmit & Receive Voltage Response Thread Choices: 1" tapered BSP x 0.75" long 1" NPT x 0.94" long (ref.) M32-1.5 x 0.75" long Additional Resources Theory of Operations Applying Ultrasonic Technology Impedance Magnitude & Phase Airmar’s T1 Developer’s Transceiver Module can be used for evaluation of AIRDUCER® Transducers. Frequency in kHz Magnitude Phase ©Airmar Technology Corporation ARK41_rU 04/11/24 As Airmar constantly improves its products, all specifications are subject to change without notice. All specifications typical at 22°C. Factory Mutual approved models suitable for: Class I, Division 1, Hazardous Locations. AIRDUCER® is a registered trademark of Airmar Technology Corporation. AMPHENOL is a registered trademark of Amphenol Corporation. Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated

Open the catalog to page 1