ARK30
1Pages

Catalog excerpts

Ultrasonic Air Transducer Technical Data Sheet 30 kHz AIRDUCER® Ultrasonic Transducer Applications • Level measurement • Level measurement in chemically aggressive environments • Food and beverage processing • Proximity sensing • Obstacle avoidance Best Operating Frequency: 30 kHz, ±4% Minimum Transmit Sensitivity at Best Transmit Frequency: 105 dB re 1μPa/V at 1 m Minimum Receive Sensitivity at Best Receive Frequency: -155 dB re 1V/μPa Minimum Parallel Resistance: 700 Ω, ±30% Minimum and Maximum Sensing Range*: 60 cm to 30 m Typical Sensing Range: 80 cm to 25 m Free (1 kHz) Capacitance: 5,700 pF, ±20% pF Beamwidth (@ -3 dB Full Angle): 12°, ±2° Maximum Driving Voltage (2% Duty Cycle Tone Burst): 2,200 Vpp Operating Temperature: -40°C to 90°C Weight: 800 g Housing Material: Kynar® 720 Acoustic Window: Kynar® 720 • Rugged sealed construction • Housing design will accommodate transceiver and signal processing electronics • Standard internal shielding Options • Cable length can be customized • 10 KΩ thermistor available for temperature compensation • Mounting caps available in BSP, NPT, or M32 threads • Available in alternate housing material (AR30) *Pulse-Echo Mode: Minimum and maximum ranges are best case scenarios. Actual range may vary, depending on drive circuitry and signal processing. Note: Optimally, performance measurements should be taken when the t ransducer reaches a steady state. Directivity Pattern Impedance Magnitude & Phase May be shown with optional equipment. Additional Resources Theory of Operations Applying Ultrasonic Technology Transmit & Receive Voltage Response Thread Choices: 1" tapered BSP x 0.75" long 1" NPT x 0.94" long (ref.) M32-1.5 x 0.75" long Airmar’s T1 Developer’s Transceiver Module can be used for evaluation of AIRDUCER® Transducers. ©Airmar Technology Corporation ARK30_rT 04/11/24 As Airmar constantly improves its products, all specifications are subject to change without notice. All specifications typical at 22°C. Factory Mutual approved models suitable for: Class I, Division 1, Hazardous Locations. AIRDUCER® is a registered trademark of Airmar Technology Corporation. AMPHENOL is a registered trademark of Amphenol Corporation. Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliat

Open the catalog to page 1