CNOMO cylinders
24Pages

Lifelong 1962... We have already been manufacturing pneumatic cylinders for half a century now. We can say that this is a lifetime’s work. Time flies, as does innovation, and we never tire of manufacturing pneumatic cylinders and continuously improving our products; it’s part of us, of our identity, impossible to erase. It’s in our history, in our present and our future. We are “the cylinder company”. We could give a boring speech to introduce our “lifelong” product, but we don’t want to, nor need to. We all know that pneumatic cylinders exist and we know their basic functions; like all...

Index CNOMO cylinders MS Series CNOMO variations 02MS Series Double opposite cylinders Three position cylinders Cylinders with bellow Tandem cylinders Cylinders with adjustable stroke

Technical information Fluid AirControl cylinders are designed to work with non-lubricated air, which means that the cylinder components are lubricated in order to guarantee a correct operation. If you decide to use lubricated air, it’s important that the use is continuous, since this lubrication removes the one applied in the assembly phase. Bore: inside diameter of the cylinder liner (mm) Stroke: working travel (mm) Working pressure: (bar) Working temperature: (ºC) Travel speed: (m/s) Damping force: (Nm) Air consumption: (nl/min) Theoretical force: (N) Strokes All strokes available upon...

Table of maximum forces allowed by the piston rod at traction and compression (buckling) in kg Cylinder Ø Maximum forces at compression Travel in mm Maximum tensile forces Table of CNOMO cylinder forces in kg Air pressure in bar Approximate dynamic forces of the cylinders in kg 6 Table of free air consumption in litres per cm of stroke Cylinder Ø

CNOMO cylinders Solid construction cylinders manufactured in accordance with CNOMO standards. Available in diameters from 25 to 300 mm, and with any stroke length, with or without cushioning and with a wide range of fixing elements and accessories. Our cylinders incorporate an excellent protection against rust. We offer several varieties such as through rod, over-dimensioned rod, tandem and three position cylinders, with bellows, adjustable strokes, numerous options for materials among others. * The CNOMO standard includes diameters between 25 mm and 200 mm. We offer versions with diameters...

CNOMO cylinders Strokes Technical specifications All strokes available according to the customer´s needs. Cylinder heads Aluminium alloy (steel on request) Aluminium alloy (steel on request) Rolled carbon steel, chrome-plated and rectified surface Zinc-plated steel Steel (aluminium on request) NBR (Viton for high temperatures) Environmental temperature range Adjustable at both ends -10°C Fluid temperature range Maximum operating pressure Forces +200°C with Viton seals) Technical information page Technical information page

CNOMO cylinders Front cylinder head Front cushioning bush** Guide bush Rear cylinder head Rear cushioning bush** Tie rod Slipping segment Cushioning seal Serrated washer ** On the models with bore sizes 250 mm y 300 mm, the piston is divided into a front (7) and rear (7A) cushioning bush + O-Ring (17).

CNOMO cylinders Fixing elements Large Feet Bracket

CNOMO cylinders Fixing elements Short Feet Bracket Please contact our Technical Office Please contact our Technical Office Female Hinge

CNOMO cylinders Fixing elements Male Hinge Pivot for Female Hinge Pivot for Female Yoke

CNOMO cylinders Fixing elements Intermediate Hinge Female Yoke

CNOMO cylinders Fixing elements Male Yoke (without Ball Joint)

CNOMO cylinder variations Double opposite cylinders This model is based on two standard CNOMO cylinders joined at the back and fixed by four unique tie rods. It can work independently or simultaneously, depending on the circuit control. The most usual applications are the opening and closing of doors, hoppers, etc. The CNOMO standard does not include variations. Ordering example Double opposite cylinder Ø 100 mm - stroke 100 and 200 mm 02 MS 100 A 0100/0200 General information, codification, strokes and technical specifications on pages 6 and 7.

CNOMO cylinder variations Three position cylinders This model is based on a combination of two single rod cylinders of a different stroke. The total stroke is obtained by a cylinder with fixed end positions, while the intermediate position is obtained by means of another cylinder with a shorter stroke. The most usual applications are the deflection of products on conveyor belts, the working of gate valves to obtain two fixed opening positions, etc. Cylinders with different bores are available to obtain different efforts on some positions. The CNOMO standard does not include variations. The...

CNOMO cylinder variations These tandem cylinders consist of two single rod cylinders with the same bore and stroke, axially joined, as with the three position cylinders. This model is essential in those cases where a certain force is needed, but at the same time exists a limited diametrical space. The pneumatic pressure must by applied at the same time on both inlets 1 and 2. In order to move the piston rod back to its original position, only inlet 3 is used. This functioning lessens the The CNOMO standard does not include variations. Ordering example Tandem cylinder 0 80 mm - stroke 100 mm...

CNOMO cylinder variations Tandem and three positions cylinders Front liner Front piston Guide bush Rear cylinder head Rear liner Rear piston Front cylinder head Intermediate cylinder head Slipping segment Cushioning seal Serrated washer

CNOMO cylinder variations Through rod cylinders The design of these cylinders is based on the design of single rod cylinders. Thanks to the incorporation of a through rod, these cylinders are more rigid than the standard ones, allowing them to stand higher side impacts than normal cylinders. The most usual applications are the opening and closing of doors, position indication and those cases in which it is necessary to have a similar draught and thrust force at the same working pressure. The CNOMO standard does not include variations. Ordering example Through rod cylinder Ø 100 mm - stroke...