Pneumatic HEPA Vacuums
1Pages

2012 Catalog - Final table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:6.00pt "Arial", sans-serif; } .font2 { font:7.00pt "Arial", sans-serif; } .font3 { font:8.00pt "Arial", sans-serif; } .font4 { font:9.00pt "Arial", sans-serif; } .font5 { font:11.00pt "Arial", sans-serif; } .font6 { font:13.00pt "Arial", sans-serif; } .font7 { font:17.00pt "Arial", sans-serif; } Environmental Control Pneumatic HEPA Vacuums - For Hazardous Locations Pneumatic HEPA Vacuums Pneumatic powered vacuums are idal for working in wet environments or where long lengths of vacuum hose are required. Air motors require no maintenance and contain no moving parts. A built-in pressure relief valve restricts water lift to 1 60" to prevent tank collapse. An on/off flow valve and pressure gauge are provided. Spark-free air motor. AV-2PBP Specifications Inlet Pressure: 80 psi with 1/2" I.D. hose Inlet Flow: 70 cfm required Vacuum Pressure: 250" water lift maximum, adjusted to 160" water lift with relief valve Vacuum Flow: 100 - 170 cfm based on inlet pressure Noise Level: 75dbA @ 90 psi inlet pressure Tank: Stainless Steel AV-15P AV-5P Model No. Description AV-2P AV-5P AV-15P AV-55P 2 gallon recovery, pneumatic motor, stainless steel tank, complte with wand, filters, and accessories 5 gallon recovery, pneumatic motor, stainless steel tank, wand, accessory tools, and filters 15 gallon recovery, pneumatic motor, stainless steel tank, cart, wand, accessory tools, and filters 55 gallon drum lid assembly with HEPA filter, 1.5 " hose connection, and pneumatic motor Back-Pack Pneumatic Model 2 gallon, pneumatic motor, stainless steel vacuum with back pack frame See Page 69 for Replacement Bags, Filters and Accessories Conductive Pneumatic HEPA Vacuums Safely Remove Potential Static Charge Build-up Pneumatic spark free vacuum motor All aluminum non-sparking tools and 2-piece aluminum wand 10 ft., 1.5" Conductive Vacuum hose with cuffs (grounds to tank) Motor head has grounding wire attached to the recovery can 25 ft. ground wire is attached to the vacuum recovery can to attach to a grounded external device for static removal Sp騩cifications Inlet Pressure: 1/2" I.D. hose - 80 psi Inlet Flow: 70 cfm required Vacuum Pressure: 250" water lift maximum, adjusted to 160" water lift with relief valve Vacuum Flow: 100 -170 cfm based on inlet pressure Noise Level: 75dbA @ 90 psi inlet pressure For' Use In AV-55DD Model No. Description AV-55P-CND Note: AV-55P-CND is supplied with all ground wires connected, conductive hose, steel drum and a 55 gallon drum dolly AV-2P-CND AV-5P-CND AV-15P-CND AV-55P-CND AV-55DL AV-55DD 2 gallon recovery, pneumatic motor, stainless steel tank, complete with wand, filters, accessory tools and ground wires 5 gallon recovery, pneumatic motor, stainless steel tank, wand, filters, accessory tools and ground wires 15 gallon recovery, pneumatic motor, stainless steel tank, cart, wand, filter accessory tools and ground wires 55 gallon drum lid assembly with HEPA filter, 1.5 " conductive 10ft hose, pneumatic motor, steel 55 gallon drum, drum dolly, filters, accessory tools and ground wires Drum lid includes 1.5 " goose neck adapter (order motor, filters, and hoses separately) Drum Dolly - 55 gallon See Page 69 for Replacement Bags, Filters and Accessories 1-800-866-8100www.airsystems.con