Universal Swivel Bulkhead Fitting
2Pages

Universal Swivel Bulkhead Fittings The Air Logic Division of Knapp Manufacturing, Inc. designs and manufactures a comprehensive line of pneumatic and vacuum control equipment. Our product line includes Universal Swivel Bulkhead Fittings. The modular design allows you to design the fitting specifically for your application. The barb size and the swivel barb configuration are both customizable options. Components for the Universal Swivel Bulkhead can be purchased in a Starter Kit. Assembly is easy; all it takes is a SNAP! No glue or solvents are required to connect the bulkhead base to the swivel barb port using our simple, snap-together construction. If you prefer, we can provide the Swivel Bulkhead Fitting already assembled to your specifications. The unique design of the modular bulkhead base allows the swivel fitting to rotate 360°, independent of the barbed base. A Double Swivel Bulkhead Base provides the ability to utilize a swivel fitting on both ends of the bulkhead fitting. Three barb configurations are available, the Straight Swivel, the Swivel Elbow and the Swivel Tee. Barbs are available for 1/16”, 3/32”, 1/8” or .170” I.D. tubing. The Bulkhead Fitting is precision molded in black Nylon. Buna-N, Ethylene Propylene, Silicone and Viton O-rings are available. An operating temperature range of 40° to 120°F (5° to 48°C.) is recommended United States Patent Office, Patent Pending. Please order assembled Universal Swivel Bulkhead Fittings using the chart below. Choose the Material, the Bulkhead Base, the Swivel Barb Port(s) and the type of O-Ring. (Kit information is on the back page.) Port #1 - HexSide | Port #2 - for DSB Material Bulkhead Base Swivel Barb Port Configurations S0 - Straight for 1/16” I.D. tubing S3 - Straight for 3/32” I.D. tubing S5 - Straight for 1/8” I.D. tubing S6 - Straight for .170" I.D. tubing 1/8” I.D. tubing E3 — Elbow for 3/32” I.D. tubing Ar . log/c and /— are trademarks of Air Logic registered in the United States Patent and Trademark Office. DSB -Double Swivel Bulkhead

PRODUCT SPECIFICATIONS Barb sizes for : 1/16”, 3/32”, 1/8” and .170” I.D. Tubing Housing Material: Nylon (black) Mounting Hole Diameter: 1/4” or 3/8” Operating Temperatures: 40° to 120°F. (5° to 48°C) O-Ring Material: Buna-N, Ethylene Polypropylene Silicone and Viton Supply Pressure: 125 psi (max) Swivel Barb Configurations: Straight, Elbow and Tee Thread Sizes: 1/4-28 UNF and 3/8-24 UNF (nut is included) SWIVEL BARBED PORTS T0 (2.69) .046 I.D. " (1.17)