Catalogs >
AIR CONTROL INDUSTRIES LTD >
HFM Modular Fans

HFM Modular Fans
20Pages

Catalog excerpts

HFM Centrifugal Fans A comprehensive range of forward curved centrifugal fans A comprehensive range of curved forward bladed, NEMA framed fans ACI’s latest range of forward curved centrifugal fans is a homogenous design and available in 1Ph or 3Ph, 2 or 4 pole, and ATEX rated versions for explosive risk areas. Key Performance Figures: • Flow rates up to 10,000m³/hr • Pressures up to 33mBar General Characteristics: • Suitable for continuous running up to 48°C and 148°C when fitted with a heat spinner • All casings Characteristics: sheet steel - powder General manufactured from coated (black) as standard. Options include Stainless Steel (304 or 316); Aluminium (unpainted or powder coated) • The HFM range incorporates forward curved centrifugal impellers manufactured from galvanised sheet steel as standard. Stainless Steel variations also available • Standard motors are IP54 or IP55, but others are available on request • Standard supply options: - 1Ph, 240V, 50Hz - 3Ph, 380/420VY / 220/240VD, 50Hz - Others available on request Accessories Include: • Guards • Inlet & Discharge Spigots • Optional Discharge Flanges Accessories include: • Pedestals • Inlet Bushes / Studs • Filters • Heat Spinners Dynamically balanced, forward curved impellers offer excellent operating characteristics and low noise levels.

Open the catalog to page 1

A comprehensive range of forward curved centrifugal fans The illustrated curves are for50Hz and are for selection purposes only. For full performance details please refer to the specific data sheets. Weycroft Avenue, Millwey Rise Industrial Estate, Axminster, Devon, EXI3 5HU, United Kingdom Email: sales@aircontrolindustries.com

Open the catalog to page 2

Single Inlet Centrifugal Fan (2 pole) Global Air Movement Specialists since 1969 General Characteristics: [Please note - image above may not be representative of the unit supplied] Performance Curves: Motor type: Noise levels Standard motors are IP54 or IP55. More available on Others available on request Sheet steel and powder coated (standard finish in black) Options include Stainless Steel (304 or 316); Aluminum - unpainted or powder coated ATEX, CE, CSA, UL available on request Volumetric Flow

Open the catalog to page 3

HFM 108/42 Single Inlet Centrifugal Fan (2 pole) Outline Drawing: OPTIONAL PEDESTAL [Note - Dimensions ‘F’ & ‘G’ may vary depending on motor style. Weights specified are for standard units with no accessories attached.] Accessories: INLET SPIGOT DISCHARGE FLANGE DISCHARGE SPIGOT Please note(1) - all drawing measurements are millimetres Please note(2) - above technical specifications maybe subject to change Please note(3) - image of fan may not be representative of the unit supplied AIR CONTROL INDUSTRIES LTD Weycroft Avenue, Millwey Industrial Estate, Axminster, Devon, EX13 5HU t:...

Open the catalog to page 4

Single Inlet Centrifugal Fan (2 pole) Global Air Movement Specialists since 1969 General Characteristics: Motor type: Standard motors are IP54 or IP55. More available on Others available on request Sheet steel and powder coated (standard finish in black) Options include Stainless Steel (304 or 316); Aluminum - unpainted or powder coated [Please note - image above may not be representative of the unit supplied] Performance Curves: Noise levels ATEX, CE, CSA, UL available on request Volumetric Flow

Open the catalog to page 5

Single Inlet Centrifugal Fan (2 pole) Global Air Movement Specialists since 1969 I u Outline Drawing: Please note(1) - all drawing measurements are millimetres Please note(2) - above technical specifications maybe subject to change Please note(3) - image of fan may not be representative of the unit supplied Weycroft Avenue, Millwey Industrial Estate.

Open the catalog to page 6

Single Inlet Centrifugal Fan (2 pole) Global Air Movement Specialists since 1969 I u General Characteristics: Standard motors are IP54 or IP55. More available on Motor type: Others available on request Sheet steel and powder coated (standard finish in black) Options include Stainless Steel (304 or 316); Aluminum - unpainted or powder coated variations- ATEX' CE' CSA' UL available on request [Please note - image above may not be representative of the unit supplied] _"_ Performance Curves:

Open the catalog to page 7

Open the catalog to page 8

Global Air Movement Specialists since 1969 Single Inlet Centrifugal Fan (2 pole) General Characteristics: [Please note - image above may not be representative of the unit supplied] Motor type: Noise levels Standard motors are IP54 or IP55. More available on Others available on request Sheet steel and powder coated (standard finish in black) Options include Stainless Steel (304 or 316); Aluminum - unpainted or powder coated ATEX, CE, CSA, UL available on request Performance Curves: Volumetric Flow

Open the catalog to page 9

Open the catalog to page 10

Single Inlet Centrifugal Fan (2 pole) Global Air Movement Specialists since 1969 I u General Characteristics: [Please note - image above may not be representative of the unit supplied] Motor type: Noise levels Standard motors are IP54 or IP55. More available on Others available on request Sheet steel and powder coated (standard finish in black) Options include Stainless Steel (304 or 316); Aluminum - unpainted or powder coated ATEX, CE, CSA, UL available on request Performance Curves:

Open the catalog to page 11

Single Inlet Centrifugal Fan (2 pole) Global Air Movement Specialists since 1969 ■ U Outline Drawing: Please note(1) - all drawing measurements are millimetres Please note(2) - above technical specifications maybe subject to change Please note(3) - image of fan may not be representative of the unit supplied Weycroft Avenue, Millwey Industrial Estate,

Open the catalog to page 12