EP10A Compact Blowers A belt-driven, centrifugal blower incorporating backward curved turbine bladed impellers Powerful and robust, ACI’s EP10A Compact Blowers incoporates a backward curved turbine bladed impeller. They are available with motors from 5.5 through to 18.5kW in standard metric or NEMA frames and can be easily retrofitted in place of other belt driven alternatives. Due to its relatively small footprint, the EP10A is ideal for integrating into customer’s equipment. Additionally, a hot air version is available, processing air inlet temperatures of up to 1850C / 3300F. With no costly water coolling required, significant gains in installation and running costs as well as the reliability make the EP10A/EP10AH the first choice for process air. Key Performance Figures: • Flow rates up to 2040m³/hr (1200cfm) • Pressures up to 250mBar (100In.Swg) • 5.5kW (7.4HP) to 18.5kW (25HP) • Reliable, maintenance-free operation Typical Applications: • Air Knife systems • Gas boosting • Air sampling • Pneumatic conveying • Heated process air • Clean rooms • Vacuum systems

EP10A Compact Blowers A belt-driven, centrifugal blower incorporating backward curved turbine bladed impellers 50Hz Performance Curves: The illustrated curves are for 240V 1Ph 50Hz and for selection purposes only. For full performance details please refer to the specific data sheets. By varying the speed of the blower a wide variety of performances can be achieved within the shaded areas. Volumetric Flow Reliability and Versatility The EP10A industrial blower is one of ACI’s principal and most versatile products. Its design is fundamentally different from other belt driven units because the blower...

EP10A Compact Belt Driven Centrifugal Blower General Characteristics: Motor type: Nominal supply: Main housing assembly: Aluminium Impeller: Aluminium Shaft Assembly: Hardened tool steel Drive Pulley: Steel Motor Pulley: Aluminium Mounting options: Anti vibration feet Noise levels: 82-91dB(A) Free Air, 1M (dependant on blower speed) Outline dimensions: [Please note - image above may not be representative of the unit supplied] Induction type / TEFC / IP55 Hot-air version / Available in Metric and NEMA frame version

EP10A Compact Belt Driven Centrifugal Blower Pressure performance curves: Vacuum performance curves: Please note (1) - all drawings measurements are in millimeters (mm) Please note (2) - above technical specifications are subject to change Air CONtrOl iNdustries ltd Weycroft Avenue, Millwey Industrial Estate, Axminster, Devon, EX13 5HU t: +44(0)1297 529242 f: +44(0)1297 529241 e: [email protected] w: www.aircontrolindustries.com

EP10AH Compact Belt Driven Centrifugal Blower (Hot Air) General Characteristics: Motor type: Nominal supply: Main housing assembly: Aluminium Impeller: Aluminium Shaft Assembly: Hardened tool steel Drive Pulley: Steel Motor Pulley: Aluminium Mounting options: Anti vibration feet Noise levels: 82-91dB(A) Free Air, 1M (dependant on blower speed) Outline dimensions: [Please note - image above may not be representative of the unit supplied] Induction type / TEFC / IP55 Processing temperatures Maximum air inlet temperatures of 185 deg.

Vacuum performance curves: Please note (1) - all drawings measurements are in millimeters (mm) Please note (2) - above technical specifications are subject to change AIR CONTROL INDusTRIEs LTD Weycroft Avenue, Millwey Industrial Estate, Axminster, Devon, EX13 5HU t: +44(0)1297 529242 f: +44(0)1297 529241 e: [email protected] ref: EP10AH 2014/V2 w: www.aircontrolindustries.com