Catalogs >
AIR CONTROL INDUSTRIES LTD >
DRI-Line Series JetPlates

DRI-Line Series JetPlates
2Pages

Catalog excerpts

DRI-Line Series JetPlates DRI-Line Series JetPlate Overview: JetPlates Derived from ACI Air Knife Technology, JetPlates have been purposely designed to improve the efficiency of ACI’s Drying Systems whilst also simplify installation and on-site maintenance. The benefits and features of ACI’s JetPlates include: • When compared to standard Air Knives, JetPlates deliver twice the volume of high pressure air over product • The design of the JetPlates allows for the blower-driven air to be delivered within 3mm of the product. This is because the faceplate acts as the conveyor guide rail. • The slot design incorporated into the JetPlates enables all moisture to be directed downwards and away from the convyeor line, thereby preventing any recontamination. • The installation of Jetplates simplifies installation, maintenance and operation processes. • The Jetplate design requires no pitch adjustment to achieve optimum drying performance. Configurations: JetPlates are available with a number of slot designs and plenum sizes. These are completely dependant on factors such as the bottle shape and size, speed of the line and the nature of the label type being applied. JetPlates can also be used in conjunction with Air Knives and/or cap and neck dryers. This configuration will again be determined by factors dictated by the application. Air is entrained downwads containing all spray Stepped air delivery strips water down the bottles. Slot geometry developed provides optimum performance JetPlate face constructed from robust PE1000 plate Bottles upto 3 litres can be dried using JetPlate arrangement Only adjustment necessary is for width of bottles Drying Systems for the Filling Industry

Open the catalog to page 1

DRI-Line Series JetPlates DRI-Line Serie Jetplate and Air Knife outline drawing: JetPlate mountings: • JetPlates will be supplied with a set of mounting brackets that will need to be directly attached to the existing conveyor (fixings are not supplied as standard). • JetPlates will need to be mounted so that the slots of the dryer are in line with, and close to the neck of the product being dried. • JetPlates can be moved to suit various sizes of product by simple ‘slide’ adjustment. Please note (1) - all drawings measurements are in millimeters (mm) Please note (2) - above technical...

Open the catalog to page 2