Single stage Lateral Channel Blowers Compressor - 50Hz D1.17DSM Compliance with the ATEX Directive 94/9/EC C € Compliance with the Machinery Directive 2006/42/CE - Maximum flow: 1615 mJ/h - Maximum Pressure: 275 mbar - Aluminium alloy parts non sparkling - Motors ATEX Ex nA MB T4 Gc with PTC sensor - Suitable for horizontal and vertical installation (for Biogas application, only vertical) - Inlet / Outlet ports: G 5" For Biogas application (to be listed at order) - Anodizing - Impregnation - Provision for pressure and temperature control sensors - Drain holes - Only vertical installation with No. 3 vibration dampers included (Refer to the doc: "Overall dimensions for Biogas application") MARKING ■ Zone 2, Cat 3G (GAS) <g> C€ H 3G c IIB T4 ■ Zone 22, Cat 3D (DUST) <S> C€ II 3D c T1 35°C For Biogas application Zone 2, Cat 3G (GAS) <g>C€ II 3G cb IIB T3 Technical Data for 50Hz ■ 2 poles ■ Three-Phase Motors (5] Order Code Maximum flow Installed Power [kW] Electric Motor data Voltage [2] A/Y Rated Amps A/Y [A] For proper installation and safe use of the blower it must be equipped with relief valve and air filter in accordance with 94/9/EC Atex Directive. For further details ask for the Compressor connection diagram. Data subject to change without prior notice.