Compact Blowers
6Pages

{{requestButtons}}

Catalog excerpts

Compact Blowers - 1

EP10A Compact Blowers A belt-driven, centrifugal blower incorporating backward curved turbine bladed impellers Powerful and robust, ACI’s EP10A Compact Blowers incoporates a backward curved turbine bladed impeller. They are available with motors from 5.5 through to 18.5kW in standard metric or NEMA frames and can be easily retrofitted in place of other belt driven alternatives. Due to its relatively small footprint, the EP10A is ideal for integrating into customer’s equipment. Additionally, a hot air version is available, processing air inlet temperatures of up to 1850C / 3300F. With no costly water coolling required, significant gains in installation and running costs as well as the reliability make the EP10A/EP10AH the first choice for process air. Key Performance Figures: • Flow rates up to 2040m³/hr (1200cfm) • Pressures up to 250mBar (100In.Swg) • 5.5kW (7.4HP) to 18.5kW (25HP) • Reliable, maintenance-free operation Typical Applications: • Air Knife systems • Gas boosting • Air sampling • Pneumatic conveying • Heated process air • Clean rooms • Vacuum systems

Open the catalog to page 1
Compact Blowers - 2

EP10A Compact Blowers A belt-driven, centrifugal blower incorporating backward curved turbine bladed impellers 50Hz Performance Curves: The illustrated curves are for 240V 1Ph 50Hz and for selection purposes only. For full performance details please refer to the specific data sheets. By varying the speed of the blower a wide variety of performances can be achieved within the shaded areas. Volumetric Flow Reliability and Versatility The EP10A industrial blower is one of ACI’s principal and most versatile products. Its design is fundamentally different from other belt driven units because the...

Open the catalog to page 2
Compact Blowers - 3

Belt Driven Centrifugal Blower Global Air Movement Specialists since 1969 General Characteristics: Motor type: Nominal supply: Induction type / TEFC / IP55 Main housing assembly: Aluminium Impeller: Aluminium Shaft Assembly: Hardened tool steel Drive Pulley: Steel Motor Pulley: Aluminium Mounting options: Anti vibration feet Noise levels: blower speed) [Please note - image above may not be representative of the unit supplied] Hot-air version / Available in Metric and NEMA frame versions Outline dimensions:

Open the catalog to page 3
Compact Blowers - 4

Belt Driven Centrifugal Blower Global Air Movement Specialists since 1969 Pressure performance curves: Volumetric Flow Vacuum performance curves: Please note (1) - all drawings measurements are in millimeters (mm) Please note (2) - above technical specifications are subject to change Weycroft Avenue, Millwey Industrial Estate.

Open the catalog to page 4
Compact Blowers - 5

Belt Driven Centrifugal Blower (Hot Air) Global Air Movement Specialists since 1969 General Characteristics: Motor type: Nominal supply: Induction type / TEFC / IP55 Main housing assembly: Aluminium Impeller: Aluminium Shaft Assembly: Hardened tool steel Drive Pulley: Steel Motor Pulley: Aluminium [Please note - image above may not be representative of the unit supplied] Mounting options: Noise levels: Anti vibration feet blower speed) Maximum air inlet temperatures of

Open the catalog to page 5
Compact Blowers - 6

Belt Driven Centrifugal Blower (Hot Air) Global Air Movement Specialists since 1969 Pressure performance curves: Volumetric Flow Vacuum performance curves: Please note (1) - all drawings measurements are in millimeters (mm) Please note (2) - above technical specifications are subject to change Weycroft Avenue, Millwey Industrial Estate.

Open the catalog to page 6

All AIR CONTROL INDUSTRIES LTD catalogs and technical brochures

  1. EV EU Series

    4 Pages

  2. X1.08

    1 Pages

  3. X1.13

    1 Pages

  4. X1.21

    1 Pages

  5. X1.32

    1 Pages

  6. D.140

    1 Pages

  7. D.170

    1 Pages

  8. D2.70

    1 Pages

  9. D2.85

    1 Pages

  10. X1.40

    1 Pages

  11. X1.50

    1 Pages

  12. X1.70

    1 Pages

  13. X1.85

    1 Pages

  14. D1.140

    1 Pages

  15. D1.170

    1 Pages

  16. X2.05

    1 Pages

  17. X2.07

    1 Pages

  18. X2.10

    1 Pages

  19. X2.14

    1 Pages

  20. X2.20

    1 Pages

  21. X2.25

    1 Pages

  22. X2.35

    1 Pages

  23. X2.42

    1 Pages

  24. VBL8

    1 Pages

  25. VBL8/3

    1 Pages

  26. VBL9

    1 Pages

  27. VBM3

    1 Pages

  28. VBM4

    1 Pages

  29. VBM9

    1 Pages

  30. VBW6

    1 Pages

  31. VBW6/3

    1 Pages

  32. VBW7

    1 Pages

  33. MR315L

    1 Pages

  34. VBW7/3HS

    1 Pages

  35. MR400R

    1 Pages

  36. MR480R

    1 Pages

  37. HFM Series

    20 Pages

  38. EP10 Series

    6 Pages

  39. MS Series

    18 Pages

  40. HFM 280/116

    2 Pages

  41. HFM 315/128

    2 Pages

  42. Air Knives

    6 Pages

Archived catalogs