Catalogs >
AIR CONTROL INDUSTRIES LTD >
Bottle & Can Drying Systems

Bottle & Can Drying Systems
16Pages

Catalog excerpts

‘LNL’ (Low Noise Level) Drying System Configuration ‘LNL’ Low Noise Level Drying System Product Category All bottles/cans/pouches etc Application area Drying specific or complete areas on high speed lines ACI’s premium drying system whereby the centrifugal blower and the air delivery device(s) are housed within a robust stainless steel enclosure. The LNL design protects the centrifugal blower from any water-spray contamination as well as containing noise emissions. ‘LNL’ illustration with JetPlates & Air Knives: Pad Filter & EP10A Blower Baffle Guard Acoustic enclosure containing ACI’s EP10A belt driven blower. Blower starters can be supplied and fitted Access doors can be supplied with or without windows Baffle Plates on both the entry & exit points of the LNL unit, reduce noise levels by 5dB(A) Method of air delivery (Jetplate/Air Knife Combination shown) Conveyor section can be offered with the LNL system. This allows ACI to pre-fit the air delivery devices Stainless steel leg kit Tapered drainage base Adjustable feet ‘LNL’ System options: Option Blower Specification 1 15kW EP10A Blower (18-19,000 rpm) 2 15kW EP10A Blower (18-19,000 rpm) 3 15kW EP10A Blower (18-19,000 rpm) Air Delivery Device 2 x JetPlates, 2 x 320mm St. St. Air Knives Can Tunnel with 2 x 300mm St.St. Air Knives 2 x 1200mm St.St. Air Knives with 4 flexible nozzles Drying Systems for the Filling Industry

Open the catalog to page 1

‘LNL’ (Low Noise Level) Drying System ACI’s ‘LNL’ drying system is a fully enclosed unit as both the EP10A compact blower and the chosen air delivery device(s) are housed within a sealed, robust acoustic enclosure. This not only protects the blower unit from water/spray contamination, but also attenuates noise levels well below 85dB(A). Noise reduction (baffle tunnels) can also be added to exit and entry points of the enclosure, further reducing noise levels by approximately 5dB(A). In addition, ACI offer a length of conveyor section allowing air delivery devices to be pre-fitted before...

Open the catalog to page 2

Mini ‘LNL’ (Low Noise Level) Drying System Configuration ‘MINI LNL’ MINI Low Noise Level Product Category All bottles/cans/pouches etc Application area Drying specific or complete areas on low to medium speed lines The ‘MINI LNL’ system is a compact totally enclosed system where both centrifugal blower and the air delivery device(s) are completely contained within a robust stainless steel enclosure. ‘LNL’ illustration with JetPlates & Air Knives: Acoustic enclosure containing ACI’s 5MS11F invert driven blower External cylindrical air intake filter Baffle Plates on both the entry and exit...

Open the catalog to page 3

Mini ‘LNL’ (Low Noise Level) Drying System ACI’s ‘MINI LNL’ drying system is a fully enclosed unit as both the 5MS11 Blower and the Airknives are housed within a sealed, robust acoustic enclosure. This not only protects the blower unit from water/spray contamination, but also attenuates noise levels below 80dB(A). Noise reduction (baffle tunnels) can also be added to exit and entry points of the enclosure to further reducing noise levels. ‘MINI LNL’ outline drawing: Other options: These will include: Air delivery devices ACI can offer a number of alternatives to delivering the air to the...

Open the catalog to page 4

‘EL’ (Eye Level) Drying System Configuration ‘EL’ Product Category Application area ‘EL’ Eye Level Drying System All bottles/cans/pouches etc Drying specific or complete areas on high speed lines ACI’s ‘EL’ Eye Level System is a semi-enclosed unit where the supplied blower is contained within a stainless steel enclosure. Additional protection to the blower is given by mounting the enclosure to a leg kit that can be easily positioned either to the side or directly above the conveyor / filling line. ‘EL’ illustrated with Can Drying Tunnel: Acoustic enclosure containing ACI’s EP10A belt driven...

Open the catalog to page 5

Application area on high speed lines i-enclosed unit where the supplied blower is contained within a stainless steel enclosure. Additional ounting the enclosure to a leg kit that can be easily positioned either to the side or directly above the ‘EL’ (Eye Level) Drying System ACI Part Number Airknife Length 2 x 1200mm St St Airknives each fitted with x2 ACI’s ‘EL’ flexible nozzles Drying System configuration protects the compact blower from any spray 2 x JetPlates, 2 x 320mm St St Airknives the air delivery device. Noise levels are approximately 90dB(A). EL-02 15KW contamination emanating...

Open the catalog to page 6

‘RM’ (Remote Blower) Drying System ConfigurationRemote Blower Drying System Product Category All bottles/cans/pouches etc Application area_Drying specific or complete areas 'RM’ illustration shown with Air Knives and JetPlates: Method of air delivery Flexible or rigid ducting readily supplied Ducting accessories such as ‘Y splitters and flow control valves can be readily supplied with this configuration ACI’s EPI0A compact bloweris supplied with AV mounts. Blower pedestals are available 'RM’ system options: Option Blower Specification Air Delivery Device ACI Part No Jl5kW...

Open the catalog to page 7

DRI-Line Series DRI-Line Series ‘RM’ (Remote Blower) Drying System Air Control Industries ‘RM’ (Remote System ‘RM’ (Remote Blower) Drying Blower) Drying System Configuration Product Category Application area Drying specific or complete areas is characterised by having no enclosures supplied for either spray Without compromising reliability or performance, ACI’s ‘RM’ Remote Blower System is designed to offer a ‘bare bones’ drying The RM system is characterised by having no enclosures blower must be restricted and a minimum of 3 metres solution that does not compromise drying performance...

Open the catalog to page 8

DRI-Line Series JetPlates DRI-Line Series JetPlate Overview: JetPlates Derived from ACI Air Knife Technology, JetPlates have been purposely designed to improve the efficiency of ACI’s Drying Systems whilst also simplify installation and on-site maintenance. The benefits and features of ACI’s JetPlates include: • When compared to standard Air Knives, JetPlates deliver twice the volume of high pressure air over product • The design of the JetPlates allows for the blower-driven air to be delivered within 3mm of the product. This is because the faceplate acts as the conveyor guide rail. • The...

Open the catalog to page 9