Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. aim inc
  3. AFE-xDHx Double Head Line

AFE-xDHx Double Head Line

AFE-xDHx Double Head Line
1 / 2 PagesView full catalog

AFE-xDHx Double Head Line

Product catalog summary
Performance Specifications
The AccuForm E-Series CNC Wire Bending machines offer a wire diameter range of 2mm to 10mm, with a precision wire feed resolution of +/- 0.006mm. The set-up time varies between 5 to 30 minutes depending on the model. Power requirements include a 3-phase, 50/60 Hz voltage of 380V/460V. The dimensions are 4.3m x 1.5m x 2m, with air requirements of 57 LPM at 7 Bar or 2 SCFM at 100 PSI.
Wire and Bender Specifications
The machines support a maximum wire tensile strength of 620 N/mm². The standard wire feed speed is up to 55 m/min, with a bender resolution of 0.0005° and a maximum bender speed of 1200°/sec. The maximum bender angle is unlimited.
Weight and Dimensions
Shipping weights range from 1951 Kg to 2495 Kg, with corresponding dimensions in feet being approximately 14 x 5 x 6.6.
Additional Features
The machines feature dual contra rotating straighteners for minimal torsion and a SmartEditor® for 3D preview and collision detection. The RS10 Straightener Module is available for enhanced precision.
Contact Information
For more information, visit AIM, Inc. at 14103 McCormick Drive, Tampa, FL 33626, U.S.A., or contact them via phone at +1 813.818.8222 or email at [email protected].
See more

Catalog excerpts

AFE-xDHx Double Head Line-1

AccuForm E-Series AFE 3DH shown without safety barrier for display purposes.

 Open the catalog to page 1
AFE-xDHx Double Head Line-2

Wire Diameter Range (M i l l i mete rs) * 2mm - 4mm 3mm - 6.5mm 3mm - 10mm 4mm - 10mm 90 kPSI 90 kPSI 90 kPSI 90 kPSI Max. Wire Tensile At Max. Wire Diameter Max. Wire Length (Meters) Center Clamp Width (Millimeters) Performance Specifications Feeder w/Rotary Straightener Option (Rsx) Wire Feed Resolution (precision) (Millimeters) +/- 0.006m m +/- 0.006mm +/- 0.006mm +/- 0.006mm Wire Feed Resolution (precision) (Inches) 0.0002" 0.0002" 0.0002" 0.0002" Std. wire feed speed (Meters) 55 m/min 50 m/ min 45 m/ min 45 m/min Std wire feed speed (Feet) 180' f/min 165' f/min 1 4 8' f/min 148' f/min Bender...

 Open the catalog to page 2

All Aim inc catalogs and technical brochures

  1. AFT Tabletop
    AFT Tabletop

    2  Pages

  2. Pre-Feeder “NEW”
    Pre-Feeder “NEW”

    2  Pages

  3. AccuSort
    AccuSort

    2  Pages

  4. AccuThread
    AccuThread

    2  Pages

  5. AccuForm Servo Cold Header
    AccuForm Servo Cold Header

    2  Pages

  6. BW Series Butt Welders
    BW Series Butt Welders

    2  Pages

  7. FANUC Integration
    FANUC Integration

    2  Pages

  8. AFM 3Dx S SYNCHRO
    AFM 3Dx S SYNCHRO

    2  Pages

  9. AFES Line - Servo Cutter
    AFES Line - Servo Cutter

    2  Pages

  10. AFCe Line
    AFCe Line

    2  Pages

  11. AccuLathe AL8, AL12, AL16
    AccuLathe AL8, AL12, AL16

    2  Pages

  12. T-Welder P e r f o r m a n c e i n C N C W i r e B e n d i n g
    T-Welder P e r f o r m a n c e i n C N C W i r e B e n d i n g

    2  Pages

  13. AccuForm MODULAR D o u b l e H e a d B e n d e r s
    AccuForm MODULAR D o u b l e H e a d B e n d e r s

    2  Pages

  14. AccuForm MODULAR Performance in CNC Wire Bending
    AccuForm MODULAR Performance in CNC Wire Bending

    2  Pages

  15. SERVO STRAIGHT & CUT SOLUTIONS AFM-1Dx
    SERVO STRAIGHT & CUT SOLUTIONS AFM-1Dx

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.