- Catalogs
- AIKI RIOTECH
- AT-501 EXII
AT-501 EXII
AT-501 EXII
- Equipped with five feed rollers and a hot pin heater for processing POY and FDY fibers.
- Capable of producing T&T yarn and differential shrinkage yarn using various heaters.
- Adjustable ATY elongation and loop via the second heater.
- Processing conditions are controlled by a PLC, with settings adjustable via a touch panel or PC.
- Independent operation of machine sides (R and L) with a line shaft driving system for uniform spindle quality.
- Winding size options of 8 inches (200mm) and 10 inches (250mm) with optional auto doffer.
- Supports up to 108 spindles, expandable in blocks of 12.
- Model: AT-501 EXII
- Dimensions: Width 2,850mm, Length 20,270mm, Height 3,540mm
- Denier range: 30 - 600 denier
- Feed roller speed: 100m/min to 1,000m/min
- Winding speed: 100m/min to 800m/min
- Feed and delivery rollers: Nip roller system with different speeds, carbon steel and N.B.R. rollers
- Winding part: Surface drive winding with specific package and paper tube sizes
- Controlled by MC-3000 PLC system with twin control system
- Jet box with max air pressure of 1.5 Mpa, includes water attachment and fume extraction
- Optional slub device and auto doffing system
- Heaters: Hot pin, 1st, and 2nd heaters with specific temperature ranges and power ratings
- Yarn sensor and cutter, oiling device, and yarn operation tools included
- Power source: 3-phase, 4-wires, 210 V, 50/60 Hz with a total power consumption of 133.725 kw
Catalog excerpts
Description of Air Texturizing Machine The air texturizing machine has the following functions: it feeds continuous fibers (POY/FDY) such as nylon and polyester into an air texturizing nozzle with a feed roller set at arbitrary speed, interlaces that yarn with air or blends them using turbulence generated by compressed air inside the nozzle, and then produces yarn known as ATY. Features of AT-501 EXII a) Equipped with five feed rollers and a hot pin heater. ATY is produced through the use of POY and FDY of continuous synthetic fibers such as nylon and polyester. b) T&T yarn can be produced with the hot pin heater and first heater. c) Differential shrinkage yarn can be produced with the first heater. d) ATY elongation and loop can be adjusted with the second heater. e) All processing conditions are determined by PLC. Setting can be carried out with either the touch panel or a PC. f) Either side (R and L) of the machine can operate independently in different conditions. Utilizes a line shaft driving system, allowing for uniform spindle quality. g) Winding size is 8 inches (200mm) with 10 inches (250mm) supported if equipped with the optional auto doffer. h) The maximum number of spindles is 108. Adding to it every 12 spindles (one block) is supported. AIKI RIOTECH CORPORATION 39, INOKUCHIKOBANDO-CHO, INAZAWA, AICHI, JAPAN ZIP CODE :492-8162 TEL : +81-587-21-9191 FAX : +81-587-21-1277 E-MAIL : [email protected] URL : www.aiki-japan.com
Open the catalog to page 1
Specification 1 Model 2 Main specifications Denier range Feed roller speed Winding speed Feed roller 7) Winding part a) Take up package size b) Paper tube size 8) Feed change 10) Slub device 11) Auto doffing system 12) Hot pin heater a) Type b) Temperature range 13) 1st heater a) Type b) Temperature range 14) 2nd heater a) Type b) Temperature range 15) Yarn sensor & cutter 16) Oiling device 17) Yarn operation 18) Power source Pos. Height Length Width 108 3,540mm 20,270mm 2,850mm 30 - 600 denier ( Total denier for winding ) Min. 100m/min. - Max. 1,000m/min. Min. 100m/min. - Max. 800m/min. 5pcs./pos....
Open the catalog to page 2All AIKI RIOTECH catalogs and technical brochures
AT-501 HD III2 Pages
AT-501 C2F2 Pages
AT-501 B2 Pages
AT-501 A2 Pages