*mydirectindustry

AT-501 C2F

Product catalog summary

Description of Air Texturizing Machine
The Air Texturizing Machine AT-501 C2F is designed to process continuous fibers such as nylon and polyester. It uses an air texturizing nozzle to interlace or blend yarns using compressed air, producing Air Textured Yarn (ATY).

Features of AT-501 C2F

Equipped with two feed rollers, allowing over-feeding of fibers at variable rates.
Processing conditions are controlled by a PLC, with settings adjustable via a touch panel or PC.
Independent operation of machine sides (R and L) with a line shaft driving system for uniform spindle quality.
Winding sizes available in 8 inches (200mm) or optionally 10 inches (250mm).
Spindle configuration starts at 24, expandable in blocks of 24 up to a maximum of 216 spindles.

Specifications

Model: AT-501 C2F
Dimensions: Width 2,836mm, Length 26,666mm, Height 2,840mm
Denier Range: 30 - 600 denier
Feed Roller Speed: 100m/min to 1,000m/min
Winding Speed: 100m/min to 800m/min
Roller Specifications: Drive and nip rollers made of carbon steel and N.B.R. respectively, both 80mm in diameter.
Winding Part: Surface drive winding with package sizes of 200mm or 250mm, and paper tube sizes specified.
Feed Change: Controlled by MC-3000 PLC system with twin control system.
Jet Box: Max air pressure of 1.5 Mpa, includes water attachment and fume extraction systems.
Optional Features: Slub device, auto doffing system, hot pin heater, and 2nd heater.
Yarn Sensor & Cutter: 3 sensors and 2 cutters per position.
Oiling Device: Roller touch system with 60mm roller.
Yarn Operation: Includes suction gun and air suction lines.
Power Source: 3-phase, 4-wire, 210 V at 50 or 60 Hz, with a total power consumption of 90.3 kW.

Catalog excerpts

Description of Air Texturizing Machine The air texturizing machine has the following functions: it feeds continuous fibers (POY/FDY) such as nylon and polyester into an air texturizing nozzle with a feed roller set at arbitrary speed, interlaces that yarn with air or blends them using turbulence generated by compressed air inside the nozzle, and then produces yarn known as ATY. Features of AT-501 C2F a) Equipped with two feed rollers. ATY can be produced by over-feeding FDY such as nylon and polyester into the nozzle at an arbitrary rate. b) All processing conditions are determined by PLC. Setting can be carried out with either the touch panel or PC. c) Either side (R and L) of the machine can operate independently in different conditions. Utilizes a line shaft driving system, allowing for uniform spindle quality. d) Winding size is 8 inches (200mm) with 10 inches (250mm) available as an option. e) The minimum number of spindle is 24. Adding it to every 24 spindles (one block) is supported. The maximum number of spindles is 216. AIKI RIOTECH CORPORATION 39, INOKUCHIKOBANDO-CHO, INAZAWA, AICHI, JAPAN ZIP CODE :492-8162 TEL : +81-587-21-9191 FAX : +81-587-21-1277 E-MAIL : [email protected] URL : www.aiki-japan.com

Open the catalog to page 1

Specification 1 Model 2 Main specifications Denier range Feed roller speed Winding speed Feed roller 7) Winding part a) Take up package size b) Paper tube size 10) Slub device 11) Auto doffing system 12) Hot pin heater a) Type b) Temperature range 13) 2nd heater 14) Yarn sensor & cutter 15) Oiling device 16) Yarn operation 17) Power source Pos. Height Length Width 216 2,840mm 26,666mm 2,836mm 30 - 600 denier ( Total denier for winding ) Min. 100m/min. - Max. 1,000m/min. Min. 100m/min. - Max. 800m/min. 2pcs./pos. ( Option ; Extra 2 Feed rollers ) Nip roller system , 2 different speed Drive roller...

Open the catalog to page 2

All AIKI RIOTECH catalogs and technical brochures

AT-501 HD III
2 Pages
AT-501 EXII
2 Pages
AT-501 B
2 Pages
AT-501 A
2 Pages