AT-501 B
2Pages

Description of Air Texturizing Machine The air texturizing machine has the following functions: it feeds continuous fibers (POY/FDY) such as nylon and polyester into an air texturizing nozzle with a feed roller set at arbitrary speed, interlaces that yarn with air or blends them using turbulence generated by compressed air inside the nozzle, and then produces yarn known as ATY. Features of AT-501 B a) Equipped with two feed rollers. ATY can be produced by over-feeding FDY such as nylon and polyester into the nozzle at an arbitrary rate. b) ATY loop and elongation can be adjusted with the second heater. c) All processing conditions are determined by PLC. Setting can be carried out with either the touch panel or a PC. d) Either side (R and L) of the machine can operate independently in different conditions. e) Utilizes a line shaft driving system, allowing for uniform spindle quality. f) Winding size is 8 inches (200mm) with 10 inches (250mm) available as an option. g) The minimum number of spindle is 24. Adding it to every 24 spindles (one block) is supported. The maximum number of spindles is 216. AIKI RIOTECH CORPORATION 39, INOKUCHIKOBANDO-CHO, INAZAWA, AICHI, JAPAN ZIP CODE :492-8162 TEL : +81-587-21-9191 FAX : +81-587-21-1277 E-MAIL : aiki@aiki-japan.co.jp URL : www.aiki-japan.com

Specification 1 Model 2 Main specifications Denier range Feed roller speed Winding speed Feed roller 7) Winding part a) Take up package size b) Paper tube size 10) Slub device 11) Auto doffing system 12) Hot pin heater a) Type b) Temperature range 13) 2nd heater a) Type b) Temperature range 14) Yarn sensor & cutter 15) Oiling device 16) Yarn operation 17) Power source Pos. Height Length Width 216 3,101mm 18,357mm 2,835mm 30 - 600 denier ( Total denier for winding ) Min. 100m/min. - Max. 1,000m/min. Min. 100m/min. - Max. 800m/min. 2pcs./pos. ( Option ; Extra 2 Feed rollers ) Apron nip roller...