*mydirectindustry

NC Specs

Product catalog summary

Overview: This document provides technical specifications for AIDA-America's NC1 and NC2 press models, detailing their capacities, dimensions, and features. AIDA-America is a subsidiary of AIDA Engineering LTD., Japan.

NC1 Models Specifications:

Tonnage Capacity: Ranges from 350 kN (39 U.S. tons) to 2500 kN (275 U.S. tons).
Stroke Length: Varies from 70 mm (2.76 in.) to 300 mm (11.8 in.).
SPM (No Load): Speed ranges from 20 to 150 strokes per minute depending on the model.
Die Height: Ranges from 200 mm (7.8 in.) to 540 mm (21.2 in.).
Slide Adjustment: From 50 mm (1.97 in.) to 120 mm (4.7 in.).
Bolster Area: Dimensions vary significantly, with the largest being 1750 mm x 900 mm (68.9 in. x 35.4 in.).
Main Motor: Power ranges from 5.5 kW (7 HP) to 22 kW (30 HP).
Required Air Pressure: Consistently 0.5 Mpa (73 psi) across models.

NC2 Models Specifications:

Nominal Capacity: Ranges from 1100 kN (121 U.S. tons) to 2500 kN (276 U.S. tons).
Stroke Length: Varies from 110 mm (4.3 in.) to 280 mm (11.0 in.).
Continuous SPM (No Load): Speed ranges from 20 to 110 strokes per minute.
Die Height: Ranges from 350 mm (13.7 in.) to 550 mm (21.6 in.).
Slide Area: Largest dimensions are 2100 mm x 700 mm (82.7 in. x 27.6 in.).
Main Motor (Variable): Power ranges from 11 kW (15 HP) to 30 kW (40 HP).

Standard Equipment & Features:

Fabricated steel frame and 6-point bronze gib guiding.
Hydraulic Over-Load Protection (HOLP) and forged steel crankshaft.
Wet type clutch and brake, air counterbalance cylinder.
Motor-driven die height adjustment and automatic lubrication system.
Control includes PLC with operator touch screen and programmable limit switch.
Automatic flywheel brake with actuation valve (NC2 Models).

Contact Information: AIDA-America Corporation, Dayton, OH, USA. Phone: (937) 237-2382, Email: [email protected], Website: www.aida-america.com

Catalog excerpts

NC1 MODELS Press Technical Data Tonnage Capacity Rated Tonnage Point (Above BDC) Stroke Length SPM (No Load) Die Height, Slide to Bolster Slide Adjustment Slide Area (LR x FB) Bolster Area (LR x FB) Frame Gap Frame Inside Measurement Bolster Thickness Maximum Upper Die Weight Main Motor Required Air Pressure Press Technical Data Tonnage Capacity Rated Tonnage Point (Above BDC) Stroke Length SPM (No Load) Die Height, Slide to Bolster Slide Adjustment Slide Area (LR x FB) Bolster Area (LR x FB) Frame Gap Frame Inside Measurement Bolster Thickness Maximum Upper Die Weight Main Motor Required Air Pressure AIDA-America Corporation is a subsidiary of AIDA Engineering LTD., Sagamihara, Japan | Specifications are subject to change without notice | © Copyright 2017 AIDA-America

Open the catalog to page 1

NC2 MODELS Press Technical Data Tonnage Rating Point Nominal Capacity Stroke Length Slide Adjustment Range Maximum Upper Die Weight Bolster Thickness Frame Inner Dimension Main Motor (Variable) STANDARD EQUIPMENT & FEATURES* ■■ Fabricated Steel Frame Control Includes PLC with Operator Touch Screen for Functionality Main Control Panel on Outside Frame (Right Side) Cast Iron Slide Programmable Limit Switch, Four (4) PLS Outputs for Cast Bolster Plate Hydraulic Over-Load Protection (HOLP) Brake Monitor Forged Steel Crankshaft Operations Interface Terminal Wet Type Clutch and Brake Clutch-Brake Control...

Open the catalog to page 2

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list