Overview

The document details the specifications and technical data for the AHP Hydraulic Cylinder model HZF 160 with external guide. It includes mounting modes, dimensions, operation modes, and material treatments relevant for industrial hydraulic applications.

1. Product Description

The AHP HZF 160 is a hydraulic cylinder featuring an external guide system designed for precise linear motion. It is suitable for applications requiring robust guidance and high reliability.

2. Technical Specifications

• Nominal Pressure: 160 bar (2300 PSI), static
• Mounting Mode: Mode 05 (specific mounting details provided)
• Operation Mode: Various operation modes are referenced, including cushioning options at front and rear ends.
• Material Treatment: Plasma nitriding is applied to guide surfaces to enhance wear resistance and guide properties.

3. Dimensions and Mechanical Parameters

The document provides detailed dimensional data in millimeters for various parts of the cylinder, including piston diameter, rod diameter, stroke length, and mounting dimensions. Key dimensions include:

• Piston diameters ranging from 20 mm to 80 mm
• Rod diameters from 20 mm to 80 mm
• Stroke lengths and overall lengths (L1 + stroke) specified for different configurations
• Mounting thread sizes from M20 to M36

Tables list precise measurements for components such as d1, d2, d3, d4, d5, d8, L1, L2, L5, L6, and others, with tolerances indicated.

4. Mounting and Installation

The mounting mode 05 is detailed with bolt sizes, hole diameters, and spacing to ensure proper installation. Mounting holes include 4x M12 bolts and Ø12 H7 holes for alignment. The document specifies front and rear cushioning options for end-of-stroke damping, improving operational smoothness and reducing wear.

5. Customization and Ordering

Order specifications follow a structured code format (e.g., HZF160.80/50/05.204.100), allowing customization according to customer requirements. The document emphasizes that dimensions and features can be adapted based on specific customer needs.

6. Additional Notes

• Technical changes are reserved without prior notice.
• All dimensions are in millimeters.
• Surface treatment by plasma nitriding is recommended for guide surfaces to ensure durability.
• End-of-stroke cushioning is available on front and rear ends for models 204, 206, and 208.

7. Manufacturer Information

Produced by AHP Merkle GmbH, located in March, Germany. Contact details include phone, fax, and email for technical support and ordering.

Summary

This document serves as a comprehensive technical reference for the AHP HZF 160 hydraulic cylinder with external guide, providing critical data on dimensions, mounting, operation modes, and material treatments. It is intended for engineers and technicians involved in specifying, installing, and maintaining hydraulic cylinders in industrial settings.